Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > TP-Link Router Archer C6 4.0 refuses to connect to SONOFF device POWR316 ewelink or tasmota

< Wi-Fi Routers

TP-Link Router Archer C6 4.0 refuses to connect to SONOFF device POWR316 ewelink or tasmota

fritserasmus

3 weeks ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-05-13

TP-Link Router Archer C6 4.0 refuses to connect to SONOFF device POWR316 ewelink or tasmota

3 weeks ago

Model: Archer C6

Hardware Version: V4

Firmware Version: 1.13.6 Build 240430 Rel.54880n(4555)

I have a number of

Sonoff Basic

Sonoff POW 2

Sonoff T0US -which all connect to any of the five TP-Link routers I have

The new Sonoff POWR316 and my NetHome Plus EU-OSK105 cannot connect to any TP-Link AP in my network.

I disabled 5 GHz to illuminate the mix, and tried all Security settings, but none allows connection

Termite software reports as follows:

00:09:40.154 WIF: Connecting to AP1 ERASMITV in mode as tasmota-6AC4C4-1220...
00:09:43.480 WIF: Connect failed as AP cannot be reached
00:09:44.508 WIF: Connecting to AP2 ERASMI in mode as tasmota-6AC4C4-1220...
00:09:56.833 WIF: Connect failed with AP timeout

I also tried the IoT Network on the TP-Link - Makes not difference. The TP-Link does not allow the Sonoff to connect

When I use a pocket LTE router that connects to TP-Link first and serves WiFi the Sonoff and NetHome connect fine

https://community.tp-link.com/en/home/forum/topic/615104

this URL reports exactly the same issue.

When will TP-Link sort it out

Any suggestions to resolve this so I can use IoT on TR-Link

1 Reply

Joseph-TP

3 weeks ago

Posts: 849

Helpful: 65

Solutions: 187

Stories: 0

Registered: 2024-06-22

Re:TP-Link Router Archer C6 4.0 refuses to connect to SONOFF device POWR316 ewelink or tasmota

3 weeks ago

Hi @fritserasmus,

If only one or some of your devices like your PC/Phone can access the internet, but other devices can't connect to the internet, please try the below:
1. Please connect the Ethernet cable from your modem or internet service provider to the Router's WAN port.
2. Check if the router has configured a parental control profile and remove the device from the profile.
3. For wired devices:
1) Connect the device to other LAN ports instead of the IPTV port you configured//set up earlier on the router.
2) Change the Ethernet cable.
3) Switch to another LAN port on the router or the device.
3. For wireless devices:
1) Enable the guest network and connect the device to the guest network.
2) Enable a hotspot Wi-Fi on a phone and connect the device to the hotspot WI-FI. Please reach out the device support if this doesn't work.
4. Change the DNS server: How to Change the DNS Servers.
5. Reset the device to factory default settings.

TP-Link Router Archer C6 4.0 refuses to connect to SONOFF device POWR316 ewelink or tasmota

TP-Link Router Archer C6 4.0 refuses to connect to SONOFF device POWR316 ewelink or tasmota

Information

Voters 0

Tags