Firmware upgradw
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The access point suddenly runs slowly. If I reboot the access point it will operate at correct speed for a period then slow, until I reboot. Would a firmware update fix the issue and if so how do I go about this?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @step0,
If you are experiencing the low speed when using the TP-Link access point, please refer to the following steps:
1. Make sure the speed is normal when PC is connected to the same Ethernet port of the front router.
2. Try a different ethernet cable or port on the router.
3. Change the wireless channel and channel width.
- Copy Link
- Report Inappropriate Content
Hi @step0,
If you are experiencing the low speed when using the TP-Link access point, please refer to the following steps:
1. Make sure the speed is normal when PC is connected to the same Ethernet port of the front router.
2. Try a different ethernet cable or port on the router.
3. Change the wireless channel and channel width.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 312
Replies: 1
Voters 0
No one has voted for it yet.