Home Network Community >
Powerline Adapters >
TL-WPA4220KIT and wifi extension problems: wrong ip-range
TL-WPA4220KIT and wifi extension problems: wrong ip-range
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA4220KIT and wifi extension problems: wrong ip-range
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-02-14
2014-02-14 03:46:33
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-02-14
TL-WPA4220KIT and wifi extension problems: wrong ip-range
2014-02-14 03:46:33
Tags:
Region : Sweden
Model : TL-WPA4220
Hardware Version : V1
Firmware Version :
ISP : Telenor
Hi,
I'm having problems using the TL-WPA4220KIT to extend my existing wifi network. I've tried both the "wi-fi clone" and manual setup way without success. My setup is as follows:
4G Modem/Router (D-link DWR-923) - [Cat6 lan cable] - TL-PA4010 - [electrical wire] - TL-WPA4220
The router is providing IP-addresses to the network (DHCP) in the range 192.168.1.(2 - 155), subnet 255.255.255.0
I've assigned a static IP to the TL-WPA4220 via the DHCP reserve ip functionality (MAC address - IP link) and set it to use the same SSID and encryption method + password as the main router.
If I connect a laptop via cable to the TL-WPA4220 everything works fine; I get internet access and good speeds. But when I try to connect on the wifi-network when I'm in the zone extended by the TL-WPA4220 I do not get internet access ... my iPad and iPhone just shows a spinning "connecting to network" circle and after a while when checking the network details I see that an IP-address in the 169.x.x.x, subnet 255.255.0.0 has been assigned.
It seems like the TL-WPA4220 is not re-distributing the main router's IP-addresses provided by DHCP, but instead picks them from "its own range". How do I fix this (the TL-WPA4220 should be a slave device to the router in all ways [SSID, encryption, DHCP, etc])?
[Bump] Do anyone have any input on this?
Solution
Model : TL-WPA4220
Hardware Version : V1
Firmware Version :
ISP : Telenor
Hi,
I'm having problems using the TL-WPA4220KIT to extend my existing wifi network. I've tried both the "wi-fi clone" and manual setup way without success. My setup is as follows:
4G Modem/Router (D-link DWR-923) - [Cat6 lan cable] - TL-PA4010 - [electrical wire] - TL-WPA4220
The router is providing IP-addresses to the network (DHCP) in the range 192.168.1.(2 - 155), subnet 255.255.255.0
I've assigned a static IP to the TL-WPA4220 via the DHCP reserve ip functionality (MAC address - IP link) and set it to use the same SSID and encryption method + password as the main router.
If I connect a laptop via cable to the TL-WPA4220 everything works fine; I get internet access and good speeds. But when I try to connect on the wifi-network when I'm in the zone extended by the TL-WPA4220 I do not get internet access ... my iPad and iPhone just shows a spinning "connecting to network" circle and after a while when checking the network details I see that an IP-address in the 169.x.x.x, subnet 255.255.0.0 has been assigned.
It seems like the TL-WPA4220 is not re-distributing the main router's IP-addresses provided by DHCP, but instead picks them from "its own range". How do I fix this (the TL-WPA4220 should be a slave device to the router in all ways [SSID, encryption, DHCP, etc])?
[Bump] Do anyone have any input on this?
Solution
TP-Admin wrote
Hi All,
TP-Link is aware of this issue. Following our research and investigation, we found that this issue due to some routers' default LAN IP is 192.168.1.1 which is the same as the TL-WPA4220_V1 default IP. So there will be IP address conflict when you first setup or reset the TL-WPA4220_V1. ( Our TL-WPA4220 will change its IP address after detecting IP address conflict, but there still will be a short IP address conflict. )
In order to help these customers who are affected by this reason our R&D have made a beta firmware ( TL-WPA4220_V1_180509_Beta ) to change the TL-WPA4220_V1 default IP from 192.168.1.1 to 192.168.0.254.
You can visit our official website try to download and upgrade the latest beta firmware to resolve this issue.
Note: After upgrading this firmware, you need manually reset this device to make it work.
For TL-WPA4220(EU/UK)_V1 : https://www.tp-link.com/en/download/TL-WPA4220_V1.html#Firmware
For TL-WPA4220(US)_V1 : https://static.tp-link.com/2018/201805/20180510/TL-WPA4220(US)_V1_180509(beta).zip
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
96 Reply
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-26 03:39:28
Setting a fixed IP address on each WPA4220 has helped greatly; until the WPA42220's decided to forget that they had been configured with fixed IP addresses,
and resumed their novel practice of self-assigning themselves IP addresses. Perhaps the WPA4220 firmware is clever enough to detect conflicts, and re-assign itself
a new IP address if that occurs; but that is just a guess on my part. The obvious solution is for the devices to behave like normal DHCP clients; the mystery is why
the TPLINK engineers have not figured this out.
and resumed their novel practice of self-assigning themselves IP addresses. Perhaps the WPA4220 firmware is clever enough to detect conflicts, and re-assign itself
a new IP address if that occurs; but that is just a guess on my part. The obvious solution is for the devices to behave like normal DHCP clients; the mystery is why
the TPLINK engineers have not figured this out.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#52
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-26 03:42:31
The WPA4220 does not act as a DHCP client, and never issues a request to a DHCP server; so I do not see how setting up a reserved IP address will be of any help.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#53
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-26 03:49:33
And pray that the device in fact remembers to use the fixed IP address it was assigned. Five of the devices in my network decided to forget the assignment, and go back to using IP roulette.
Another five are still using the fixed IP addresses I assigned. I have no clue why some devices remember, and others do not.
Another five are still using the fixed IP addresses I assigned. I have no clue why some devices remember, and others do not.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#54
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-26 03:53:49
For how long did it work like a charm? The TPLink device has most certainly self-assigned itself another IP address, which will work until some other device is assigned that IP address.
It might take weeks or months before the conflict occurs.
It might take weeks or months before the conflict occurs.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#55
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-10-28
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-28 00:25:39
slotest wrote
The WPA4220 does not act as a DHCP client, and never issues a request to a DHCP server; so I do not see how setting up a reserved IP address will be of any help.
If the factory IP address is 192.168.1.1 for all, two of them in the same network should conflict if you make no changes to the IP address right?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#56
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-29 21:14:36
There is actually no way to set a "fixed IP address" on the WPA4220. You can only set "preferred" IP address, which the device will use first when looking for a suitable IP address.
But if the device discovers that its preferred IP address is in use, it picks other values until it finds one currently unused.
And at that point, there is no way to tell what its preferred IP address is; the http display only shows the IP address currently in use!
I had 6 WPA4220 devices configured with distinct preferred IP addresses; they used those addresses for about a month, then something caused them all to pick other (random?) addresses
(sadly within the range handed out by my DHCP server).
But if the device discovers that its preferred IP address is in use, it picks other values until it finds one currently unused.
And at that point, there is no way to tell what its preferred IP address is; the http display only shows the IP address currently in use!
I had 6 WPA4220 devices configured with distinct preferred IP addresses; they used those addresses for about a month, then something caused them all to pick other (random?) addresses
(sadly within the range handed out by my DHCP server).
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#57
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-29 21:18:06
No, since the factory default IP address i(192.168.1.1) is just a preferred IP address, not a fixed IP address.
If multiple WPA4220s are connected with the same preferred IP address, most with discover a conflict and pick another IP address.
I have not yet done enough testing to learn whether a WPA4220 abandons an IP address which some other device starts using.
If multiple WPA4220s are connected with the same preferred IP address, most with discover a conflict and pick another IP address.
I have not yet done enough testing to learn whether a WPA4220 abandons an IP address which some other device starts using.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#58
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-29 21:23:34
That technique worked for me for a while; but eventually something caused my multiple WPA4220s to stop using their preferred IP addresses, and they all picked random IPs.
You can not set a "fixed" IP address on the WPA4220, only a preferred one.
You can not set a "fixed" IP address on the WPA4220, only a preferred one.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#59
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 9
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-05-10
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-29 22:09:39
Latest test result: if a WPA4220 is using an IP address, and a DHCP server assigns that address to some other device,
the WPA4220 abandons the address and uses its algorithm to choose another. So perhaps the unpredictable IP addresses will
not actually explain the various problems noted in this thread; seems more likely it is a problem with the wifi connection.
the WPA4220 abandons the address and uses its algorithm to choose another. So perhaps the unpredictable IP addresses will
not actually explain the various problems noted in this thread; seems more likely it is a problem with the wifi connection.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#60
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2015-10-28
Re:TL-WPA4220KIT and wifi extension problems: wrong ip-range
2015-10-30 00:53:34
Actually my two 4220s had the same 192.168.1.1 address when they stopped working, they did not pick another address, at least after a few hours.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#61
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-02-14
2014-02-14 03:46:33
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-02-14
Information
Helpful: 0
Views: 31609
Replies: 96
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message