Region : Iran

Model : TL-WR740N

Hardware Version : V4

Firmware Version :

ISP :

Hi everybody

Please at first see attached file(Scenario).






Wireless ADSL Modem(Left side of scenario) working in bridge mode(DHCP Disabled).
Router in first floor(Right Side) connected to modem with PPPoE connection(DHCP Enabled).
ADSL modem in second floor(Right side) is only used as switch

Router is connected to internet and everything is ok and also PC in the first floor(Right side) have internet access.
From mentioned Router and PC, the wireless modem and switcher is accessible(testing with ping, and no problem)
here is the system routing table of Router


System Routing Table
ID Destination Network Subnet Mask Gateway Interface
1 172.16.200.1 255.255.255.255 0.0.0.0 WAN
2 192.168.1.0 255.255.255.0 0.0.0.0 WAN
3 192.168.0.0 255.255.255.0 0.0.0.0 LAN & WLAN
4 0.0.0.0 0.0.0.0 172.16.200.1 WAN



I want to all client with 192.168.1.X can access to internet through Router(Not wireless modem, because it's now in bridge mode and also I want to control bandwidth with router). I set 192.168.1.200 as gateway for clients but still can not connect to internet.

Any Idea?