Home Network Community > 5G/4G Routers > power supply not working
< 5G/4G Routers

power supply not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

power supply not working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
power supply not working
power supply not working
2025-03-02 17:22:01 - last edited 2025-04-09 08:17:01
Model: Archer MR400  
Hardware Version: V5
Firmware Version:

Hi,


it is possible to power this router from a solar system with 12V batteries and a charge controller for solar panels (eg this one: BlueSolar PWM Charge Controller (DUO) LCD&USB)? I use this cable to power the router: 12V PD3.0 USB Type-C samec na 12V DC 5,5 * 2,5 mm 12V PD3.0 USB Type-C to 12V DC 5,5 * 2,5 mm).

 

When using the supplied 220V adapter, the router works normally, but when connected in this configuration (above), it always restarts after a while. Where could the problem be?

 

Thanks in advance for your help.

 

Miroslav Klich

 

miroslav.klich@gmail.com

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:power supply not working-Solution
2025-03-03 08:03:30 - last edited 2025-04-09 08:17:01

  @MiroKl 

 

Hi, welcome to our community.

It is more suggested to use the original power adapter to work with the router, to avoide any incompatibility.

You may check the auto-reboot schedule is enabled on the web UI of the router.

It is also suggested to try different power sockets to exclude other possible cuases.

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:power supply not working-Solution
2025-03-03 08:03:30 - last edited 2025-04-09 08:17:01

  @MiroKl 

 

Hi, welcome to our community.

It is more suggested to use the original power adapter to work with the router, to avoide any incompatibility.

You may check the auto-reboot schedule is enabled on the web UI of the router.

It is also suggested to try different power sockets to exclude other possible cuases.

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 193

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.