Problem with WA5210G in AP CLIENT MODE

Problem with WA5210G in AP CLIENT MODE
Problem with WA5210G in AP CLIENT MODE
2014-03-07 19:00:16
Region : Italy

Model : TL-WA901ND

Hardware Version : V3

Firmware Version :

ISP :


Hi everyone
I have set WA5210G in AP CLIENT MODE, this device has in turn is connected to the LAN port on a switch with other PCs.

The problem is that all the devices connected behind WA5210G come with all of the MacAddress WA5210G creating problems to the DHCP server and ARP TABLE.

how can I fix it?

192.168.0.x
PCs -> SWITCH-> WA5210G (APCLIENT) -))))))))))WiFi)))))))))) - DDWRT (APMODE) ---> switch-> ROUTER DSL TD-W8960N with DHCP Server enabled .

Thanks to all
0
0
#1
Options
3 Replies
Re:Problem with WA5210G in AP CLIENT MODE
2014-03-13 13:40:24
http://forum.tp-link.com/showthread.php?3015-2-WA7510N-AP-s-in-Bridge-Mode

see post#5 for why all devices share the same MAC. This is not a problem or bug.

If your DDWRT supports 4-address-format frame of WDS, you can go to wireless menu -> wireless mode -> client to enable WDS on 5210. Then you will find what you want.

Otherwise, your DDWRT is to blame.
0
0
#2
Options
How to Configure tp link 15dbi Wirh WA5210G
2014-03-23 10:27:47
How to Configure tp link 15dbi (TP-Link TL-ANT2415D Omni OUTDOOR)antina

Region : Pakistan


Hi everyone
I have set WA5210G in AP CLIENT MODE, this device has in turn is connected to the LAN port

But router send single on 180 ,then purchase a 15dbi antina but unable to config plz tell how to config with wa5210g....

Thanks to all
0
0
#3
Options
Re:Problem with WA5210G in AP CLIENT MODE
2014-03-23 17:33:13
You can see those configuration here - https://www.youtube.com/watch?v=XE-EUaxQ3O0
0
0
#4
Options