Bandwidth Control does not work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bandwidth Control does not work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bandwidth Control does not work
Bandwidth Control does not work
2014-05-02 23:38:11
Region : Argentina

Model : TL-WR841HP

Hardware Version : V1

Firmware Version : 3.15.2 Build 131119 Rel.36304n

ISP :


My problem is that my TP-Link TL-841HP is ignoring rules that add on "Bandwidth Control Rules List"

This is my current setup:








However, any machine in the limited ip ranges can download at maximum speed that my connection allows.

Sorry for my English, I hope you understand my problem and can help me.

Regards
Guillermo Barrett
  0      
  0      
#1
Options
25 Reply
Bandwith Control does not work
2014-07-12 22:06:50
Unfortunately, I've got the same problem.
Connects to I above petitions and appeals to Bandvith Control problems.
The same can also be set and set the parameters for each computer but it does not perform any function
like that off with softwer.Rules for bandvith control does not respond regardless of the limit specified on the
computer off at maximum speed while other computers chokes the flow and the difficult access to the Internet.
Everything else is in work excellent.Signal, conection, speed, wifi, etc.
All the best in their future work I hope that perhaps a future software update to correct this deficiency


P.S. In my older TP-Link wr841nd this function (bandwith control or QoS) is work perfect.
  0  
  0  
#2
Options
Re:Bandwidth Control does not work
2014-08-22 01:17:03
TL-WR841HP_V1_131119 firmware.
Unfortunately I stand in one place. Has no nothing new on the horizon.
Summer has passed and the situation is unchanged.
Better luck next time, maybe.
Regards.
  0  
  0  
#3
Options
Re:Bandwidth Control does not work
2014-08-28 10:29:37
Firmware Version: 3.15.2 Build 131119 Rel.36304n
Hardware Version: WR841HP v1 00000000

We are all in the same situation. This issue must be fixed immediately.
I also use TL-WR841ND in my home setup. The bandwidth control was not working properly at first. After updating the firmware, it was fixed. :cool:

Recently, I installed this WR841HP in a apartment building with more than 10+ clients connected at a time. I tried to add my local IP and set the port range from 1 - 65535. Changed the value of Kbps several times. Also checked if its enabled on both sides including the "Control Settings". It still doesn't work. :(

The downloads reach 3000+Kbps even if all were set to 1000Kbps. Setting 100Kbps on control settings has made it work but raising it to 150Kbps+, it was invinsible. Restarts didn't even fix it. For the meantime, I left it as is.









  0  
  0  
#4
Options
Re:Bandwidth Control does not work
2014-09-29 04:49:59
Looks like TP-Link does not go here or do not want to know about the problem.

"As a boy sitting and looking out the window of the bus and the old man standing
-When asked do you not see that barely standing, boy correspond'm sick to look at him,
so I turn my head "

As well as technical support do not know how to help and pretend to not see the problem,
if not see the problem, then the conclusion is that the problem does not exist.
  0  
  0  
#5
Options
Re:Bandwidth Control does not work
2014-09-30 11:50:01
I think it's a bug. 841ND DO NOT have this problem.
  1  
  1  
#6
Options
Re:Bandwidth Control does not work
2014-09-30 14:57:45
Yes, its a bug. It doesn't work on TL-WR740N too. :(
  0  
  0  
#7
Options
Bandwidth Control does not work
2014-10-05 06:00:09
I bought them for allegedly strong signal to which there was a problem until he has
not out new firmvare.Now same story only with other problem, outcome technical service
do not (want) to responds.Why is so hard to find the error and correct it.
I'll see this pack and unpack the good old tl-vr841nd with dd-garden, and they quickly throw newer firmware than the manufacturer.
It's a shame, for the 1 year messing around.
Good Luck to others.
  0  
  0  
#8
Options
Re:Bandwidth Control does not work
2014-12-09 20:59:21
Maybe something good happens, maybe not.

Dear Viktor,
Many thanks for your valued reply.
Get your point and our engineer has also find the problem. They are doing their best on the next firmware to fix it.
Sorry for the inconvenience caused. Please wait the next firmware with patience, thanks!
  0  
  0  
#9
Options
Re:Bandwidth Control does not work
2014-12-10 11:13:22
It is good but not sure how long does it take...
  0  
  0  
#10
Options
Re:Bandwidth Control does not work
2014-12-12 21:30:02
Finally done, today they sent me a beta version of firmware and works.
The Bandwith Control is repaired.
  0  
  0  
#11
Options