Can't access local server in WISP mode MR3020
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't access local server in WISP mode MR3020
Region : Others
Model : TL-MR3020
Hardware Version : V1.2.0
Firmware Version : TL-MR3020_V1_140610
ISP : m-real
Hi,
I am trying to access a local server connected to the LAN port of this router, but cannot do it.
I am in WISP mode and my MR3020 connects wirelessly to my main router which is called "MAIN". It get a dynamic IP, lets say 192.168.10.105.
I have connected a PC on the LAN port, and it has an IP address. lets say 192.168.11.2 (my MR3020 is set as 192.168.11.1 on the LAN port).
The PC works flawlessly and has internet access via my MAIN router - hence connection is set properly.
I have assigned Port Forwarding of a few ports I need (80, 8000, 554, 443) pointing to the PC connected to the LAN port - 192.168.11.2
However when I try to access 192.168.10.105:80 (or :8000 or any other of the redirected ports) from my 192.168.10.xxx network, nothing happens. It looks like as if the redirect is not working in this direction. So incoming connections are somehow either forbidden or not redirected from wi-fi towards the LAN port. I have tried disabling SPI Firewall, but this didnt help. I have also tried UPNP, and the router accpts those ports and says they are redirected, but I still cannot access it from the outside.
Please advise
Model : TL-MR3020
Hardware Version : V1.2.0
Firmware Version : TL-MR3020_V1_140610
ISP : m-real
Hi,
I am trying to access a local server connected to the LAN port of this router, but cannot do it.
I am in WISP mode and my MR3020 connects wirelessly to my main router which is called "MAIN". It get a dynamic IP, lets say 192.168.10.105.
I have connected a PC on the LAN port, and it has an IP address. lets say 192.168.11.2 (my MR3020 is set as 192.168.11.1 on the LAN port).
The PC works flawlessly and has internet access via my MAIN router - hence connection is set properly.
I have assigned Port Forwarding of a few ports I need (80, 8000, 554, 443) pointing to the PC connected to the LAN port - 192.168.11.2
However when I try to access 192.168.10.105:80 (or :8000 or any other of the redirected ports) from my 192.168.10.xxx network, nothing happens. It looks like as if the redirect is not working in this direction. So incoming connections are somehow either forbidden or not redirected from wi-fi towards the LAN port. I have tried disabling SPI Firewall, but this didnt help. I have also tried UPNP, and the router accpts those ports and says they are redirected, but I still cannot access it from the outside.
Please advise
