Home Network Community > Wi-Fi Routers > WOL ARP Persistent Issue
< Wi-Fi Routers

WOL ARP Persistent Issue

12

WOL ARP Persistent Issue

WOL ARP Persistent Issue
WOL ARP Persistent Issue
2025-04-15 08:24:14
Model: Archer C6  
Hardware Version: V4
Firmware Version: 1.13.6 Build 240430

Hello everyone,
I have a problem with my Archer C6 and Wake on LAN.
I believe I have done all the necessary configurations to make my Wake On Lan work.
It seems to work because when I turn off the computer, I can start it up again. However, unfortunately, after some time with the PC turned off, the router no longer forwards the packet for the wake-up.
I have done the binding and everything that the official page recommends:
https://www.tp-link.com/us/support/faq/923/
I can't figure out how to ensure that my Archer C6 doesn't lose the references and correctly forwards the wake-up packet.

Has anyone had the same problem and found a solution?

  0      
 
  0      
 
#1
Options
14 Reply
Re:WOL ARP Persistent Issue
2025-04-16 12:02:58

Hi@TheKingLothar,

Thank you for reporting your issue to community.


To get Wake-on-LAN with TP-Link Wireless Router:
1. Ensure the mainboard and wired network adapter support the Wake-on-LAN feature.
2. Download the softwaresuch as WakeOnLanGui,LanHelper for Windows, RemoteBoot for IOS.
3. Turn on the Wake-on-LAN feature on your PC or phone. 
4. Binding your PC or phone's IP address and MAC address on the router.
5. Reserve the IP address for your PC or phone with your router. 

 

Please manually set a static IP for the client and compare whether the problem still exists?
If there is a related error message, please provide a screenshot.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#2
Options
Re:WOL ARP Persistent Issue
2025-04-16 12:15:10

  @Joseph-TP Hi, yes, everything is set up correctly. I can tell because Wake-on-LAN works. If I shut down the PC, I can turn it on both from the local network and from outside. However, if some time passes — definitely at least half an hour — it no longer turns on. When the PC has been off for a while, the network card only shows one of the two LEDs, not the usual two... and the WoL packet doesn’t turn the PC on anymore.

  0  
  0  
#3
Options
Re:WOL ARP Persistent Issue
2025-04-16 15:37:22 - last edited 2025-04-17 08:14:47

  @TheKingLothar 

 

WoL just works or it doesn't work from a router perspective.This issue is most probably related to your PC OS/NIC settings/drivers.

Here's a good article on that matter:

<https>://www.pcmag.com/how-to/turn-on-computer-from-across-the-house-with-wake-on-lan

Follow the instructions and check if they help to resolve your issue.

You could test that with another PC or laptop if you have one around to exclude any router issue.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#4
Options
Re:WOL ARP Persistent Issue
2025-04-17 06:26:07

  @terziyski I’ve done all the configurations from the link you suggested. Many were already set, but I also included the optional ones. The problem remains. If I send the wake-up packet shortly after shutting down, the PC turns on. But after just 10 minutes, it doesn’t turn on anymore. I don’t understand what I’m doing wrong.

  0  
  0  
#5
Options
Re:WOL ARP Persistent Issue
2025-04-17 08:35:44 - last edited 2025-04-17 09:30:52

  @TheKingLothar 

 

I would do the following experiment.

If you can't wake up the PC from Shutdown stae (S5) after a while then try to wake up the PC from Sleep state (S3) or Hibernation state (S4).

If you don't have hibernation option in your Power menu check here how to enable that.

Waking from S3 and S4 should be much easier than waking from S5.

In S5 the power to the NIC is cut and you may not be able to wake up the PC at all.

That highly depends on your MB hardware,its BIOS and OS drivers.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#6
Options
Re:WOL ARP Persistent Issue
2025-04-17 08:38:39

Ciao   @terziyski  I tried putting my PC to sleep yesterday and sent it a Wake-on-LAN packet. Nothing happened... same behavior as always.

  0  
  0  
#7
Options
Re:WOL ARP Persistent Issue
2025-04-18 03:06:02 - last edited 2025-04-18 05:38:51

Hi@TheKingLothar,

Please log in to the router's web page and check the Ethernet status: Is the connection disconnected after the PC is shut down for a while?

 

In addition, do you have other devices that support WOL for comparison?

 

Please configure Address Reservation and configure IP&MAC Binding on router:

How to configure Address Reservation on Wi-Fi Routers (new logo)

How to configure IP&MAC Binding Wi-Fi Routers (new logo)

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#8
Options
Re:WOL ARP Persistent Issue
2025-04-18 07:50:16 - last edited 2025-04-18 07:59:07

Hello  @Joseph-TP , first of all thank you for the time you're dedicating to me. I took a screenshot after putting the PC to sleep. Wake On LAN wasn't working but the network card seems active. I'm also attaching the configurations you suggested because I had already done them... but maybe they're incorrect. Is there a log where I can see if the packet was transmitted?

 

 

 

  0  
  0  
#9
Options
Re:WOL ARP Persistent Issue
2025-04-18 07:51:55

  @Joseph-TP 

 

  0  
  0  
#11
Options
Re:WOL ARP Persistent Issue
2025-04-18 08:54:36 - last edited 2025-04-18 09:06:00

Hi@TheKingLothar,

Thank you for your detailed test results.

We have reported the issue to the support engineers(TKID250425024), they will likely reach out to you via email to continue to troubleshoot your issue. Please check your email box and confirm.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
  0  
  0  
#12
Options
12

Information

Helpful: 0

Views: 886

Replies: 14

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.