Home Network CommunityWi-Fi Routers Admin page not accessible/tether not displaying details
Wi-Fi Routers

Admin page not accessible/tether not displaying details

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Admin page not accessible/tether not displaying details

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Admin page not accessible/tether not displaying details
Admin page not accessible/tether not displaying details
2025-04-16 09:14:41 - last edited 2025-05-18 15:14:42
Model: Archer C2  
Hardware Version:
Firmware Version: 3.0.1

Hello,

Recently I tried to modify some settings on my device and it turned put that Tether app doesn't display any details - list of clients is empty, it doesn't even display current IP address. I have tested it on both Android and iOS devices. So I tried to access the admin panel via PC browser - I cannot log in to it. I use the same password I use on Tether. There is no error message displayed, just nothing happens. 

 

Please help.

 

Regards.

0
0
#1
1 Accepted Solution
Re:Admin page not accessible/tether not displaying details-Solution
2025-04-17 06:26:17 - last edited 2025-05-18 15:14:42

Hi@Peterus,

Thank you for reporting your issue to our community.

 

If you're struggling to access your router's login with the right credentials, consider these scenarios for resolving the issue: 
Scenario One: Unable to log in to the Web Interface or the Tether App with the correct login password.
    1). Reboot the router. 
    2). Try different browsers and incognito mode. 
    3). Try different devices. 
    4). Hard reset the router to create a new password or log in with the default admin. 


Scenario Two: Able to log in through the Web Interface but not the Tether App, or vice versa.
   1). Update the router's firmware. 
    Via Web Interface: Go to Advanced > Advanced > System Tools > Firmware Upgrade to check for updates.
    Via Tether App: Tap Tools > System > Firmware Update. 
    2). Update your Tether app to the latest version.
    3). Reboot the router. 
    4). Try different devices.
    5). Hard reset the router. 
Note: A hard reset will revert the router to its factory settings without Internet access, requiring reconfiguration.
 

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#2
1 Reply
Re:Admin page not accessible/tether not displaying details-Solution
2025-04-17 06:26:17 - last edited 2025-05-18 15:14:42

Hi@Peterus,

Thank you for reporting your issue to our community.

 

If you're struggling to access your router's login with the right credentials, consider these scenarios for resolving the issue: 
Scenario One: Unable to log in to the Web Interface or the Tether App with the correct login password.
    1). Reboot the router. 
    2). Try different browsers and incognito mode. 
    3). Try different devices. 
    4). Hard reset the router to create a new password or log in with the default admin. 


Scenario Two: Able to log in through the Web Interface but not the Tether App, or vice versa.
   1). Update the router's firmware. 
    Via Web Interface: Go to Advanced > Advanced > System Tools > Firmware Upgrade to check for updates.
    Via Tether App: Tap Tools > System > Firmware Update. 
    2). Update your Tether app to the latest version.
    3). Reboot the router. 
    4). Try different devices.
    5). Hard reset the router. 
Note: A hard reset will revert the router to its factory settings without Internet access, requiring reconfiguration.
 

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click △ Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#2

Information

Helpful: 0

Views: 353

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.