Dropping Wifi Signal TL-MR3420 3g/4g N Router
Firmware Version: | 3.15.9 Build 140912 Rel.35984n |
Hardware Version: | MR3420 v2 00000000 |
Transmit Power: | High Middle Low |
Beacon Interval : | (40-1000) |
RTS Threshold: | (256-2346) |
Fragmentation Threshold: | (256-2346) (default settings 2346) "cannot change at all) |
DTIM Interval: | (1-255) |
Enable WMM (ENABLED) | |
Enable Short GI (ENABLED) Situation: Wifi Signal always drop and suddenly disappear,i try to upgrade the firmware to "mr3420v2_en_3_16_9_up_boot(150319)" latest firmware, but when i upgrade and upload my backup settings my admin control panel cannot login, so i decided to put back the router firmware to the current version which is (3.15.9 Build 140912 Rel.35984n) please give me an accurate solution for this problem. still my wifi signal drop and disappear. Thanks, -Jeck |
|
[/TD] |
|
[TD] |
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Good day.
Sorry for the delay.
May I know how long have you had the router and when did the issue start?
If possible, please try to change the wireless channel on the router, such as:
And have you also tried to reset the MR3420 by holding the reset button/pinhole for 10s?
Thank you~
- Copy Link
- Report Inappropriate Content
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.15.9 Build 140912 Rel.35984n
ISP : stc
My wifi signal drop for a couple of minute and disappear, i try to upgrade the firmware to the latest version but when i already upgrade it and restore my backup settings i can't connect to the admin control panel. how can i fix this please help me thanks.
-jeck
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Sorry if this is too old... I have the same router (also v2) and the firmware installed is 3.16.9. However the Wifi signal drops (disappears) after a while anyways.
Is there a new firmware version, or something that might help?
Thanks.
- Copy Link
- Report Inappropriate Content
Good day.
Sorry for the delay.
May I know how long have you had the router and when did the issue start?
If possible, please try to change the wireless channel on the router, such as:
And have you also tried to reset the MR3420 by holding the reset button/pinhole for 10s?
Thank you~
- Copy Link
- Report Inappropriate Content
Hi @Sunshine ,
Thanks for your reply and help. I have had the router for a few years already, I do not remember exactly how long though. These problems have happened for as long as I can remember, I first blamed the 3G signal, but soon realized that it was the Wifi signal that just disappeared. I actually quit using the router some years ago because of this. But now another router failed and I needed to quickly replace it, so I installed it again, unfortunately with the same results.
I was not aware of the existence of this web site in the past, that is why I am just asking now, after having the router for so long.
Anyways, I have reset the router (pinhole way) a few times, and reconfigured it too, but I had not thought of changing the channel to a fixed one. Why would that fix the problem? It is not that the signal gets weak or noisy, like when you are on a busy channel, it is just that it vanishes, the wifi connections drop and I can not see the SSID even if a laptop is sitting right next to the router. In any case, I have done this now (set a fixed channel) and I will see if things get better. I will be reporting back here whatever happens.
Thanks again!
- Copy Link
- Report Inappropriate Content
Hi again, @Sunshine .
The wifi signal stayed up for about 48 hours this time, after trying your suggestion (setting a fixed channel). A lot longer than before, but it finally dropped anyways. So, I guess fixing the channel helps, but it does not completely fix the problem.
In any case, I can live with resetting the router every night before going to bed. I will see if that leaves me with a solid signal all day.
Thanks again for your help!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1602
Replies: 6
Voters 0
No one has voted for it yet.