EX 511 easymesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Eu comprei um roteador EX511 e estou usando em modo bridge na rede da minha escola. Mas, quando tentei adicionar um roteador Mercusys MR80X como agente em uma rede mesh, os dois não estão dialogando. Consigo visualizar os dois na topologia da rede, mas a rede do Mercusys aparece normalmente e, caso eu queria acessá-la, é possível. Pelo que andei pesquisando, não deveria ser assim.
Alguém pode me ajudar?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@Euzim,
Thank you for contacting our community.
According to the translation of Google Translate, I think that your question is that you want to create an Easymesh network between EX511 and . If there is any discrepancy, please describe it in English.
EX511 is a customized device specifically designed for local Service Providers. Its software is tailored to meet the unique requirements of these providers, ensuring alignment with their specific needs. Due to the specialized nature of the firmware on your device, our ability to provide troubleshooting may be limited.
We can certainly offer some troubleshooting tips that may help resolve your issue. Please consider the following:
1. Hard reset the MR80X:Press and hold reset button for more than 5 seconds to reset the router.
2. Please refer to the FAQ to add MR80X as a satellite router: How to add a router to an EasyMesh network as a satellite device
If the problem persists after trying these steps, we recommend contacting the technical support of your Service Provider who supplied the device, as they are best suited to provide the necessary assistance for your device.
- Copy Link
- Report Inappropriate Content
Hi@Euzim,
Thank you for contacting our community.
According to the translation of Google Translate, I think that your question is that you want to create an Easymesh network between EX511 and . If there is any discrepancy, please describe it in English.
EX511 is a customized device specifically designed for local Service Providers. Its software is tailored to meet the unique requirements of these providers, ensuring alignment with their specific needs. Due to the specialized nature of the firmware on your device, our ability to provide troubleshooting may be limited.
We can certainly offer some troubleshooting tips that may help resolve your issue. Please consider the following:
1. Hard reset the MR80X:Press and hold reset button for more than 5 seconds to reset the router.
2. Please refer to the FAQ to add MR80X as a satellite router: How to add a router to an EasyMesh network as a satellite device
If the problem persists after trying these steps, we recommend contacting the technical support of your Service Provider who supplied the device, as they are best suited to provide the necessary assistance for your device.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 175
Replies: 1
Voters 0
No one has voted for it yet.