Fixed bandwidth for device
Fixed bandwidth for device
Tags:
#Bandwidth Control/QoS
Model:
Archer MR400
Hardware Version: V4
Firmware Version: 1.3.0 0.9.1 v0001.0 Build 230511 Rel.58510n
Hi, I need to limit the bandwidth of my smart tv.
Among the settings of the MR400 v4.3 there is QoS but it only allows you to set the percentage and priority.
For example, I set 100Mbps as the download limit, 20% for low priority. The smart tv is set with low priority but in the absence of other devices the smart tv seems to be allowed the maximum bandwidth, that is 100Mbps. So I need to assign 20Mbps to the smart tv and no more even without other devices.
Is there some other setting that I am missing?
Thanks.
Re:Fixed bandwidth for device
You can file a feature request here:
The other option would be to use a router from the list I mentioned in my first post, connected behind the MR400 and then connect all your devices to this router.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".