BE230 and WPA7617 signal strength?

BE230 and WPA7617 signal strength?

BE230 and WPA7617 signal strength?
BE230 and WPA7617 signal strength?
2025-06-02 19:54:35 - last edited 2025-07-08 09:14:09
Model: Archer BE230  
Hardware Version: V1
Firmware Version: 1.1.4 Build 20250318 rel.31873(4555)

On the BE230 Easymesh screen (screenshot attached) it says the mesh connection to the TL-WPA7617 unit is by WiFi and that the signal strength is low. This device is connected to the router by powerline, so I'm confused by the reference to WiFi and signal strength, or does the mesh network get created wirelessly in this scenario?

 

Thanks in advance.

File:
Screenshot_2025-06-02-20-47-14-91_40deb401b9ffe8e1df2f1cc5ba480b12~2.jpgDownload
  0      
  0      
#1
Options
1 Accepted Solution
Re:BE230 and WPA7617 signal strength?-Solution
2025-06-04 06:45:51 - last edited 2025-07-08 09:14:09

Hi@SteveUK0,

Thank you for contacting our community.

 

Will the actual performance of TL-WPA7617, such as speed, be reduced as a result? Please change the position of TL-WPA7617 and compare it.

Please remove RE605X and compare whether the signal strength can be improved?
Is there any difference if you disable mesh?

 

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:BE230 and WPA7617 signal strength?-Solution
2025-06-04 06:45:51 - last edited 2025-07-08 09:14:09

Hi@SteveUK0,

Thank you for contacting our community.

 

Will the actual performance of TL-WPA7617, such as speed, be reduced as a result? Please change the position of TL-WPA7617 and compare it.

Please remove RE605X and compare whether the signal strength can be improved?
Is there any difference if you disable mesh?

 

 

Recommended Solution
  0  
  0  
#2
Options