Router resets itself to factory default
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, please this is very very bad to see my Router resets itself to factory default, and i have more than 10 of this devices .
and please what will be your advice ?
Please what is your advice on the router from from going back to default .thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi@Adewesco,
Welcome to our community.
Did you set all TL-WR940N units to Access Point mode?
If your router constantly resets itself to factory defaults automatically, please follow these steps to troubleshoot the issue:
1. Ensure that the router is connected to a stable power source. A fluctuating or unreliable power supply can cause the router to reset.
2. Ensure the original power adapter is used; try another power socket or outlet.
3. Check for firmware updates and ensure it is using the latest firmware.
4. Perform a manual reset by holding the reset button until the power LED starts flashing.
5. Inspect the router for any physical damage or loose connections.
Best Regards.
- Copy Link
- Report Inappropriate Content
Hi@Adewesco,
Welcome to our community.
Did you set all TL-WR940N units to Access Point mode?
If your router constantly resets itself to factory defaults automatically, please follow these steps to troubleshoot the issue:
1. Ensure that the router is connected to a stable power source. A fluctuating or unreliable power supply can cause the router to reset.
2. Ensure the original power adapter is used; try another power socket or outlet.
3. Check for firmware updates and ensure it is using the latest firmware.
4. Perform a manual reset by holding the reset button until the power LED starts flashing.
5. Inspect the router for any physical damage or loose connections.
Best Regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 457
Replies: 1
Voters 0
No one has voted for it yet.