Help with setting up a wireless bridge

Help with setting up a wireless bridge

Help with setting up a wireless bridge
Help with setting up a wireless bridge
2025-06-25 16:13:29 - last edited 2025-07-08 11:07:50
Model: Archer C6  
Hardware Version: V4
Firmware Version: 1.12.10 Build 230208

Dear TP-Link community,

 

I have bought the Archer C6 a few hours ago hoping i could use it as a wireless bridge through something called WDS. I followed online tutorials and nothing helped

 

I connected to my main router (192.168.0.1) just fine, but no matter what i did i didn't have Internet.

 

I have done this with an older router (TL-WR543G) so i know this is possible. I bought the Archer C6 because this older one kept turning off randomly

 

Any help would be appreciated 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Help with setting up a wireless bridge-Solution
2025-06-25 20:45:23 - last edited 2025-07-08 11:07:50

  @Lena2958438 

 

What's your main router make and model ? Here's the guide for building a WDS.

There's a newer FW release for your device here - just make sure that your FW region is EN.

Update to the latest FW release and try building WDS again.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Help with setting up a wireless bridge-Solution
2025-06-25 20:45:23 - last edited 2025-07-08 11:07:50

  @Lena2958438 

 

What's your main router make and model ? Here's the guide for building a WDS.

There's a newer FW release for your device here - just make sure that your FW region is EN.

Update to the latest FW release and try building WDS again.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options