Home Network Community > 3G/4G Routers/MiFi > How do I configure TP-LINK router to remote access with a cable modem ?
< 3G/4G Routers/MiFi

How do I configure TP-LINK router to remote access with a cable modem ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How do I configure TP-LINK router to remote access with a cable modem ?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How do I configure TP-LINK router to remote access with a cable modem ?
How do I configure TP-LINK router to remote access with a cable modem ?
2015-10-09 02:58:03
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :





Assuming that we have valid IP (201.xxx) available contracted with the ISP how to configure TL-MR3420 to remote access ?

current below configuration is working with no remote access:

WAN:
Dynamic IP
IP adress 192.168.1.10
Default gateway: 192.168.1.1
DNS server: pri.:201... sec.:201...

LAN:
IP adress: 192.168.0.1

PCs:
IP adress: 192.168.0.x
Gateway: 192.168.0.1
DNS pri: 201...
DNS sec: 201...

LAN needs fixed IPs in each machine -> working OK.
PCs internet access -> working OK.
  0      
 
  0      
 
#1
Options
5 Reply
Re:How do I configure TP-LINK router to remote access with a cable modem ?
2015-10-09 16:13:38
It seems that it is a modem router instead of a bridge modem.
Normally, with cable modem, WAN IP obtained will be a public one but yours is private.
Can you login your modem's configuration page and open port for router's WAN IP?
  0  
  0  
#2
Options
Re:How do I configure TP-LINK router to remote access with a cable modem ?
2015-10-10 07:24:53

Mavis wrote


Can you login your modem's configuration page and open port for router's WAN IP?

No, I can't login Zhone configuration page, all things have to be done using TP-LINK,
that's why I posted ... because I don't know how to configure remote access with this scenario ...
  0  
  0  
#3
Options
can you help me ?
2015-10-14 17:06:54
It is possible that no one has a lamp to illuminate these darkness ?
Where are TP-Link experts ???????
  0  
  0  
#4
Options
solved
2015-10-14 22:07:37
Contrary to my expectation, my problem was solved outside the forum.
I was surprised by the lack of general interest of " experts" in TP-Link
  0  
  0  
#5
Options
Re:How do I configure TP-LINK router to remote access with a cable modem ?
2015-10-15 13:52:12
Good!
You may share the solution here for other users' references.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1043

Replies: 5

Related Articles
How do I connect GENEXIS VPN router to TP-Link router to receive Internet?
484 0
How do I turn my tp-link archer vr2800 turn to router
485 0
How do I fix my TP-Link router as it disconnected several times?
23372 11
How to configure Access point on Router Archer C60
2776 0
HOW TO REMOTE ACCESS TO THE ROUTER FROM OTHER LOCATIONS
165 0
How do I secure my AC1200 access point.
592 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.