WA701ND repeater mode fails

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WA701ND repeater mode fails

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WA701ND repeater mode fails
WA701ND repeater mode fails
2015-10-12 23:24:50
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi


I have problems with my WA701ND configured as an universal repeater , my iphone gets 100% signal but then the signal dissapear, i thought that i was so far from the WA701ND but when i connect my iphone in a few meters from the WA701ND it happens again.


Ping test from Computer connected to the modem(wired) to WA701ND:
Sent:397
Recieved:397
Lost:0



**WA701ND**

Firmware Version: 3.17.0
Hardware Version: WA701ND v2 00000000


Status WA701ND
Operation Mode: Universal Repeater
Signal: 34dB
Channel:1
Channel Width: Automatic


LAN Type: Static IP
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Gateway:192.168.1.1
DHCP: Disable

Wireless Security:
Version: Automatic
Encryption: Automatic
Antenna Alignment:
Remote RSSI:33 to 35 dB (it changes)
Signal Percent: 100%
RSSI Range:30




**MODEM**
Control Sideband:
Upper
Wireless Channel:
Auto Scan
802.11 Mode:
802.11b/g/n
Band Width:
20M/40M
Wireless Security Mode:
WPA2 only
WPA Encryption: TKIP+AES
  0      
  0      
#1
Options
1 Reply
Re:WA701ND repeater mode fails
2015-10-13 13:50:59
When the signal disappears on your phone, can you still access internet by wire from LAN port of WR701ND to your PC?
Did you try any other wireless clients to detect Wi-Fi signal of WA701ND?
The current firmware version is 140324?
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 537

Replies: 1

Related Articles