RE550 Easymesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE550 Easymesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE550 Easymesh
RE550 Easymesh
2025-07-18 22:04:54 - last edited 2025-07-31 11:35:47
Model: RE550  
Hardware Version: V1
Firmware Version:

Hi All

I have a Fritz!box router set as mesh master and RE450 and RE550 extenders. When setup using WPS the RE450 works perfectly as a mesh system and roaming is seamless. The RE550 however will not configure as mesh and only works as an extender. TP-Link website says the 550 is Easymesh compatible while some others say not but uses TP-Links own One mesh system and some others say it's not mesh compatible at all.

So does anyone have experience of the RE550 working with Easymesh or not?

  0      
  0      
#1
Options
1 Accepted Solution
Re:RE550 Easymesh-Solution
2025-07-22 06:21:48 - last edited 2025-07-31 11:35:47

Hello@Jovin ,

Welcome to our community.

 

Yes, the RE550 is in the EasyMesh compatible list. Please confirm the firmware is up-to-date.

When you try to add the RE550, please power off the RE450 temporarily.

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:RE550 Easymesh-Solution
2025-07-22 06:21:48 - last edited 2025-07-31 11:35:47

Hello@Jovin ,

Welcome to our community.

 

Yes, the RE550 is in the EasyMesh compatible list. Please confirm the firmware is up-to-date.

When you try to add the RE550, please power off the RE450 temporarily.

 

Recommended Solution
  0  
  0  
#2
Options