EasyMesh AP - receive ack from server with ip

Macrox

2025-07-22 15:16:52 - last edited 2025-08-08 09:11:41

Posts: 21

Helpful: 70

Solutions: 0

Stories: 0

Registered: 2022-11-08

EasyMesh AP - receive ack from server with ip

2025-07-22 15:16:52 - last edited 2025-08-08 09:11:41

Model: Archer AX55

Hardware Version: V1

Firmware Version: 1.3.5 Build 20241211 rel.34816(5553)

In my AX55 (Easymesh AP), I am getting these logs every 30 seconds:

2025-07-22 10:12:25 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:12:25 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:12:25 DHCPC INFO [16142] 1/2 lease passed, enter renewing state
2025-07-22 10:11:50 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:11:50 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:11:50 DHCPC INFO [16142] 1/2 lease passed, enter renewing state
2025-07-22 10:11:15 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:11:15 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:11:15 DHCPC INFO [16142] 1/2 lease passed, enter renewing state
2025-07-22 10:10:41 DHCPC INFO [16142] receive ack from server with ip 192.168.0.3, options(serverid=192.168.0.1;lease=4294967295;subnet=255.255.255.0;dns=192.168.0.4 192.168.0.100;router=192.168.0.1;)
2025-07-22 10:10:41 DHCPC INFO [16142] send select request with options(cliid=01/6c:5a:b0:f9:2e:98:;)
2025-07-22 10:10:41 DHCPC INFO [16142] 1/2 lease passed, enter renewing state

I use to have this problem before migrating to Easymesh, and it was fixed setting a static DHCP ip, but I can't do that anymore using Easymesh. Is there something I can do to avoid this and use my Main Router as DHCP server?

1 Accepted Solution

Joseph-TP

2025-07-23 06:30:21 - last edited 2025-08-08 09:11:41

Posts: 4012

Helpful: 242

Solutions: 1454

Stories: 0

Registered: 2024-06-22

Re:EasyMesh AP - receive ack from server with ip -Solution

2025-07-23 06:30:21 - last edited 2025-08-08 09:11:41

Hello@Macrox ,

Welcome to our community.

The router in AP mode cannot continue to handle DHCP services, that is, it does not assign IP addresses, but the main router handles these tasks.
So you need to go to the modem or router in front of Archer AX55 to complete the task of assigning a static IP.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience

EasyMesh AP - receive ack from server with ip

EasyMesh AP - receive ack from server with ip

Information

Voters 0

Tags