Hi,

For security reasons I have bene asked to dactivate SNMP in my router but I cannot find any option to do it in the configuration web page.

I would appreciate it if anyone could help me.

Thank you!

  @Joseph-TP 

Thanks for your quick answer.

I would like to connect my router to my university network to provide access to that network to wireless devices in the R&D lab I lead.

One of the problems is that the university cybersecurity team needs to access to my router to periodically check its vulnerability risks, and it seems that the SPI firewall (when activated) blocks it. The computer they do the scanning from has an IP address belonging to the university network (the same the router's wan port is connected to, and therefore the wan IP adress is in the same internetwork as the vulnerability scanning computer).

The other problem is that they have done a preliminary test to my router and state that my router has SNMP activated. Nevertheless, as you say, the router does not have SNMP functionality/support. Would it be possible that the router has some option/feature (e.g., automatic updates) that can use ports normally assigned to SNMP (161, 162, 10161, or 10162) and that could be disabled? If so, please tell me how to disable it. 

Thanks in advance.

Best regards