RE 200
Saludos. Llegó de configurar varias veces el dispositivo, noté que no emite señal extendida. Necesito ayuda para solucionar.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello@DanielLeccesi ,
Welcome to our community.
According to the translation of Google Translate, your question is that you cannot see the wifi of the RE200. If there is any discrepancy, please describe it in English.
When you don't see the repeater's Wi-Fi under the Wi-Fi list, you can check the signal LED light to confirm the connection status:
1). If the 2.4G/5G/Signal lights all on, the extender is connected to the main router. The range extender might use the same network name as the main router, so you cannot see it separately. You can relocate the extender between the dead zone and the router and see if you get a better signal now. Or you can change the extender's Wi-Fi name to something different following this guidance: How to change wireless settings of TP-Link range extender on Tether App
2). If the signal LED does not light up. Please try factory reset the range extender and check if you can see the default TP-Link xxx Wi-Fi under the Wi-Fi list. Then, try to reset the extender and follow the step-by-step guide to set up the extender: How to configure Range Extender via Tether APP
- Copy Link
- Report Inappropriate Content
Hello@DanielLeccesi ,
Welcome to our community.
According to the translation of Google Translate, your question is that you cannot see the wifi of the RE200. If there is any discrepancy, please describe it in English.
When you don't see the repeater's Wi-Fi under the Wi-Fi list, you can check the signal LED light to confirm the connection status:
1). If the 2.4G/5G/Signal lights all on, the extender is connected to the main router. The range extender might use the same network name as the main router, so you cannot see it separately. You can relocate the extender between the dead zone and the router and see if you get a better signal now. Or you can change the extender's Wi-Fi name to something different following this guidance: How to change wireless settings of TP-Link range extender on Tether App
2). If the signal LED does not light up. Please try factory reset the range extender and check if you can see the default TP-Link xxx Wi-Fi under the Wi-Fi list. Then, try to reset the extender and follow the step-by-step guide to set up the extender: How to configure Range Extender via Tether APP
- Copy Link
- Report Inappropriate Content
@Joseph-TP Greetings. After configuring the device, the extended signal—XXXX Ext—disappears after a few minutes, leaving only the original signal emitted by the router. When trying to change the name from the Tether app, it won't allow it.
- Copy Link
- Report Inappropriate Content
Hello@DanielLeccesi ,
Thanks for getting back to me.
It seems that the WiFi broadcast function of RE200 is broken. Please contact local support for further help.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 95
Replies: 3
Voters 0
No one has voted for it yet.