Home Network Community > Wi-Fi Routers > Setting
< Wi-Fi Routers

Setting

Setting

Setting
Setting
2025-08-01 06:56:01 - last edited 2025-09-04 10:02:10
Model: Archer AX10  
Hardware Version: V1
Firmware Version: 01

Network indicator area red color . Same app not support. Before good working. Now too much problem  

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Setting -Solution
2025-08-04 08:52:24 - last edited 2025-09-04 10:02:10

Hello@18-LIVING,

Welcome to our community.

 

If the Router Internet LED turns red/orange occasionally,pleas try: 
1) Connect a PC directly to your modem to verify if your ISP's Internet is stable.

2) Ensure the Ethernet cable connecting your modem to the Router is properly connected, and replace old wires with new ones.

3) Please change the DNS Server of the Router, log in to the web management interface of the Router, go to Advanced > Network > Internet > Advanced Settings, and change the two DNS Servers to 8.8.8.8 and 8.8.4.4, How to Change the DNS servers on the wireless router and DSL modem router (New UI)?

4) Go to Advanced > System > Firmware Update to upgrade the firmware of the Router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Setting -Solution
2025-08-04 08:52:24 - last edited 2025-09-04 10:02:10

Hello@18-LIVING,

Welcome to our community.

 

If the Router Internet LED turns red/orange occasionally,pleas try: 
1) Connect a PC directly to your modem to verify if your ISP's Internet is stable.

2) Ensure the Ethernet cable connecting your modem to the Router is properly connected, and replace old wires with new ones.

3) Please change the DNS Server of the Router, log in to the web management interface of the Router, go to Advanced > Network > Internet > Advanced Settings, and change the two DNS Servers to 8.8.8.8 and 8.8.4.4, How to Change the DNS servers on the wireless router and DSL modem router (New UI)?

4) Go to Advanced > System > Firmware Update to upgrade the firmware of the Router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 126

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.