Business Community > Controllers > OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
< Controllers

OC200 ver: 5.15.20.39 do not automatically apply configuration to AP

12

OC200 ver: 5.15.20.39 do not automatically apply configuration to AP

OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-05 08:30:04
Tags: #Firmware Update
Model: OC200   EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.15.20.39
I have an OC200 that has been updated to the latest version 5.15.20.39 and cannot 
automatically apply the configuration to APs like in the previous version. Please tell me how to fix it.

In the previous version 5.14.32.56, when I added a list of allowed MAC addresses to the list, the APs automatically received the new configuration, and new devices with the added MAC could connect normally. Now I have to go to each AP and select "Force Provision" for that AP to receive the new configuration, and other APs must do the same for the system to receive all the new configurations

Thank you.

 
  1      
 
  1      
 
#1
Options
11 Reply
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 03:09:32

 Hi @NTHAIS 

 

Thanks for posting here.

 

Firstly, 5.15.20.39 is not the latest firmware for the OC200. It's 5.15.24. Below is the download link for OC200 V1:

https://static.tp-link.com/upload/firmware/2025/202507/20250720/OC200v1_un_1.36.7_20250707_rel72474_up.zip

 

What's the firmware and hardware of the EAP units you are using?

I am afraid they are not the latest either, and they are not fully adapted to the latest Omada controller. And this may be the cause of the situation.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 03:28:06

  @Vincent-TP 

I login to OC200 there is update notification or update or from that notification always, I'm using EAP 225-outdoor hardware version v3.0 and v1.0, software version 5.1.11 and 5.11.92

 

 ver EAP

  0  
  0  
#3
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 06:42:37

Hi  @NTHAIS 

 

It appears the latest firmware version hasn't been detected in your region yet.

 

You can manually upgrade your OC200 controller on the Global View >Settings > System Setting:

Scroll down to the bottom, you will see the option.

 

May I know where did you get the 5.1.92 firmware for EAP225-outdoor V1? 

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#4
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 06:55:42

  @Vincent-TP 

I have updated to version 5.15.24.21 but it did not fix it. I was sent version 5.1.92 by TPlink support to support testing the error of AP automatically losing connection with OC200.
  0  
  0  
#5
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 07:33:06

I too am getting lots of configuration failures with my EAP650 units on controller 5.15.24 on OC300

 

Almost anything network/interface/vlan, IP range, and especially EAP ACLs that i change results in a configuration failure and the need to either reboot the controller, EAP or do a force provision.  EAP650 v1 units are running the 1.30 beta

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
  0  
  0  
#6
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 08:18:47

Hi  @GRL 

 

Thanks for your feedback.

Just to confirm, this only occurs on the latest firmware version of the OC300, right?

 

May I ask whether this is a consistently reproducible issue or an intermittent one? If it's intermittent, could you please provide the approximate frequency of occurrence?

GRL wrote

I too am getting lots of configuration failures with my EAP650 units on controller 5.15.24 on OC300

 

Almost anything network/interface/vlan, IP range, and especially EAP ACLs that i change results in a configuration failure and the need to either reboot the controller, EAP or do a force provision.  EAP650 v1 units are running the 1.30 beta

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#7
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 08:20:56

Hi  @NTHAIS 

 

Thanks for the reply.

 

We will keep an eye on this kind of feedback.

 

In the meantime, would you please test what GRL mentioned and let us know the results on your side? Thank you in advance.

 

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#8
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 08:27:56 - last edited 2025-08-06 08:32:55

  @Vincent-TP 

 

Very consistent

 

Any changes to any network interfaces that also exist on the EAPs with a tagged SSID results in a configuration failure after a few minutes of making the change.  Change any EAP ACL and in a few minutes - configuration failure.

 

I have had the odd configuration failure on EAPs in the past on previous versions, but since the 5.15.24 controller update its been much more annoying and consistent.

 

All my EAPs are on one switch SG2428LP running the latest fw, all have the same configuration of SSIDs, all have sequential management IPs,, same networking settings - and its not always all of them thet get a config fail, sometiems jsut one or two of the 6.

 

They never go in a disconnected state, wifi is always working fine, connectivity is fine, they just fail at config changes.

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
  0  
  0  
#9
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-06 09:29:21

Hi  @GRL 

 

Thanks for the reply.

 

We didn't have this kind of issue in our local lab.

I had created a support ticket for further follow up, please have a check, the case ID is TKID250812213.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#10
Options
Re:OC200 ver: 5.15.20.39 do not automatically apply configuration to AP
2025-08-08 07:54:14

  @Vincent-TP 

 

just saw this, ill follow up shortly

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
  0  
  0  
#11
Options
12

Information

Helpful: 1

Views: 418

Replies: 11

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.