led-controller[1409]: <6> 288051 Start to run WAN0_OFF

led-controller[1409]: <6> 288051 Start to run WAN0_OFF

12 Reply
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
3 weeks ago

  @Joseph-TP No, i dont have another device to test Easymesh.

  0  
  0  
#13
Options
Re:led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2 weeks ago

Hi @LordTerror ,

Thanks for your reply; I seem to have missed it.
So, you're saying that the ONU EPON--Switch (not configured)--AX50 combination is functioning correctly and without the previous error?

Can I know the specific models of the ONU EPON and Switch? Previously, you connected the AX50 directly to the ONU EPON, right?

 

For the firmware of Archer AX50, we recommend that users use the latest version of firmware so that they can experience new features and improvements in a timely manner. Our problem analysis is generally based on the latest version of firmware.

 

Best Regards.

LordTerror wrote

  @Joseph-TP 

 

For three days I have done the following: ONU EPON - switch not configured - AX50 and the problem with the WAN port disappeared! Most likely there is a software problem between the AX50 and the EOPN. The physical WAN port of the router now works correctly when it is not directly in the EOPN. Joseph-TP  Can I find the stock firmware for the Archer AX50 v1.0 somewhere so I can test it? Because before a few updates, this problem was gone.

 

  0  
  0  
#14
Options