led-controller[1409]: <6> 288051 Start to run WAN0_OFF
led-controller[1409]: <6> 288051 Start to run WAN0_OFF
I have a problem with the AX50 router, it disconnects from the internet for about 30 seconds, when this happens in the router logs I see this
####################################################################
# Archer AX50 System Log
# Time = 2025-09-12 20:32:10
# H-Ver = 1.0.0 ; S-Ver = 1.0.16 Build 20241206 rel.67226
####################################################################
2025-09-12 20:03:25 upnp[23440]: <6> 217504 Service start
2025-09-12 20:03:25 upnp[23440]: <6> 217505 Service stop
2025-09-12 20:03:23 remote-management[23125]: <6> 282505 Service stop
2025-09-12 20:03:06 led-controller[1409]: <6> 288051 Start to run WAN1_ON
2025-09-12 20:03:06 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 20:03:06 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:03:06 nat[20916]: <6> 211501 Initialization succeeded
2025-09-12 20:03:05 nat[20916]: <6> 211501 Initialization succeeded
2025-09-12 20:03:01 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:03:01 led-controller[1409]: <6> 288051 Start to run WAN0_ON
2025-09-12 20:03:01 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:02:02 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:02:02 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 20:02:02 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:01:59 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:01:59 led-controller[1409]: <6> 288051 Start to run WAN0_ON
2025-09-12 20:01:59 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 20:01:58 nat[14849]: <6> 211501 Initialization succeeded
2025-09-12 20:01:58 nat[14849]: <6> 211501 Initialization succeeded
2025-09-12 20:01:55 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 20:01:55 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 20:01:55 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 18:25:34 upnp[14748]: <6> 217504 Service start
2025-09-12 18:25:34 upnp[14748]: <6> 217505 Service stop
2025-09-12 18:25:33 remote-management[14531]: <6> 282505 Service stop
2025-09-12 18:25:29 led-controller[1409]: <6> 288051 Start to run WAN1_ON
2025-09-12 18:25:29 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 18:25:29 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 18:25:16 nat[11815]: <6> 211501 Initialization succeeded
2025-09-12 18:25:15 nat[11815]: <6> 211501 Initialization succeeded
2025-09-12 18:25:10 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 18:25:10 led-controller[1409]: <6> 288051 Start to run WAN0_ON
2025-09-12 18:25:10 led-controller[1409]: <6> 288051 Start to run LAN_ON
2025-09-12 18:24:41 nat[8629]: <6> 211501 Initialization succeeded
2025-09-12 18:24:40 nat[8629]: <6> 211501 Initialization succeeded
2025-09-12 18:24:39 led-controller[1409]: <6> 288051 Start to run WAN1_OFF
2025-09-12 18:24:39 led-controller[1409]: <6> 288051 Start to run WAN0_OFF
2025-09-12 18:24:39 led-controller[1409]: <6> 288051 Start to run LAN_ON
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Joseph-TP No, i dont have another device to test Easymesh.
- Copy Link
- Report Inappropriate Content
Hi @LordTerror ,
Thanks for your reply; I seem to have missed it.
So, you're saying that the ONU EPON--Switch (not configured)--AX50 combination is functioning correctly and without the previous error?
Can I know the specific models of the ONU EPON and Switch? Previously, you connected the AX50 directly to the ONU EPON, right?
For the firmware of Archer AX50, we recommend that users use the latest version of firmware so that they can experience new features and improvements in a timely manner. Our problem analysis is generally based on the latest version of firmware.
Best Regards.
LordTerror wrote
For three days I have done the following: ONU EPON - switch not configured - AX50 and the problem with the WAN port disappeared! Most likely there is a software problem between the AX50 and the EOPN. The physical WAN port of the router now works correctly when it is not directly in the EOPN. Joseph-TP Can I find the stock firmware for the Archer AX50 v1.0 somewhere so I can test it? Because before a few updates, this problem was gone.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 628
Replies: 12
Voters 0
No one has voted for it yet.
