I made a mesh network out of three Archer BE550 Pro V2 units and I find that a lot of the time a device will be connected to one of the routers that is further away than another one which doesn't really make sense. So, I'm wondering if you are able to add to your easy mesh / one mesh firmware the ability to lock/strap a wifi device to a specific router. This would be really helpful for devices that are static (don't ever move) as then the user could make sure it always connects to the closest / most appropriate router rather than seemingly randomly connecting to a router further away from it with worse connection quality. I really don't know why these devices sometimes connect to routers further away with lower signal but since they do being able to lock/strap the device to a specific router would easily solve this problem. I think this feature is on the Deco series so it shouldn't be too hard to port it over to the easy mesh and one mesh feature set of your Archer series.