XX530v(IN) New Firmware Update for XPON Support
Hi There,
Kindly provide me the latest & stable Firmware Update file to support XPON for the TP-Link XX530v(IN) PON Router.
Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kevin_Z i already try this but this has many bug and feature like tr069 protocol, acs server settings was not there. Thats why bsnl technical team was refused to setup to this device. they need tr069 acs server to verify there settings. @tplink head technical team please update the fetures and stability this devise was very capable.
- Copy Link
- Report Inappropriate Content
ACS is there
reset the device once
and open this page:
http://192.168.1.1/superadmin
create a new password.
after logging in, head to administration and enable CWMP from the lists
logout and refresh
then it will switch to normal admin mode
create a new password again, and CWMP should be there
- Copy Link
- Report Inappropriate Content
@IfranAli ok. Thank you, now I have the CWMP option
The router has some stability issues, like sometimes hangs and lags, and the BSNL MAC cloning speed was reduced.
Really need an update @tplink_head please update
- Copy Link
- Report Inappropriate Content
@iamsubha26 wait patiently
they are looking into the issue and cooking an update soon.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@iamsubha26 not even the correct hardware version....
will not flash no matter what, and this is Jan 2025 firmware for v2 hardware version.
v1 is the Brazilian latest one with EPON support.
- Copy Link
- Report Inappropriate Content
There is an update was available on brazil one please check and confirm
- Copy Link
- Report Inappropriate Content
@iamsubha26 Had it installed the day since it was launched, fixed the IPv6 RADVD with Android 15+ devices
Apart from that, still no MAC Clone fix
- Copy Link
- Report Inappropriate Content
@IfranAli and all
I had some trouble with a XX530V v1 and its firmware is not updating.
The latest version is: 0.5.0 3.0.0 v6096.0 Build 241105 Rel.50104n
I got success to access the superadmin and change the CWMP & TR369 options, but the router is still getting the error 4503 when updating it with the TPlink official software (XX530vv1_0.8.0_3.0.0_UP_BOOT_agc3000(250902)_2025-09-02_11.41.46)
Is there anything that I can do to install the latest firmware please?
Thanks!
- Copy Link
- Report Inappropriate Content
@Giba_2026 That is a very strange version you have. I suggest upgrading serial-wise, instead of directly flashing latest. Flash the consecutive versions 1 by 1, then try flashing the latest.
https://www.tp-link.com/br/support/download/xx530v/v1/#Firmware
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3630
Replies: 21
Voters 0
No one has voted for it yet.