Home Network Community > Range Extenders > Hauptnetzwerk
< Range Extenders

Hauptnetzwerk

Hauptnetzwerk

Hauptnetzwerk
Hauptnetzwerk
2025-09-23 08:18:26 - last edited 2025-10-16 11:35:07

Hallo zusammen,

ich kann mit dem RE700X keine 2,5 Verbindung zum Hauptnetzwerk herstellen, sondern nur 5 GHz. Auch nicht wenn ich direkt neben dem Router stehe.

Kann mir jemand einen Rat geben ?

Danke

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Hauptnetzwerk-Solution
2025-09-24 14:57:18 - last edited 2025-10-16 11:35:07

Hello @Heinz2108 ,

According to Google Translate, your question is that you failed to connect RE700X to the 2.4G of host network. If there is any discrepancy, please describe it in English.

If the 2.4GHz light on the extender is still off after setup, please try:

  1. Connect your phone to the host router's Wi-Fi to verify it's working.
  2. Forget the router's Wi-Fi on the phone and try reconnecting to ensure the Wi-Fi password is correct.
  3. Change the router's 2.4G Wi-Fi channel to 1/6/11 . You may refer to this link or contact router support to change: Changing Channel and Channel Width on a TP-Link Router.
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Hauptnetzwerk-Solution
2025-09-24 14:57:18 - last edited 2025-10-16 11:35:07

Hello @Heinz2108 ,

According to Google Translate, your question is that you failed to connect RE700X to the 2.4G of host network. If there is any discrepancy, please describe it in English.

If the 2.4GHz light on the extender is still off after setup, please try:

  1. Connect your phone to the host router's Wi-Fi to verify it's working.
  2. Forget the router's Wi-Fi on the phone and try reconnecting to ensure the Wi-Fi password is correct.
  3. Change the router's 2.4G Wi-Fi channel to 1/6/11 . You may refer to this link or contact router support to change: Changing Channel and Channel Width on a TP-Link Router.
Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 132

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.