Business Community > Switches > LAG with SFP in Omada Controller V6
< Switches

LAG with SFP in Omada Controller V6

LAG with SFP in Omada Controller V6

LAG with SFP in Omada Controller V6
LAG with SFP in Omada Controller V6
Thursday - last edited 22 hours ago
Tags: #Configuration #Controller
Model: TL-SG3428MP  
Hardware Version: V6
Firmware Version: 6.20.16

I have an TL-SG3428MP Switch and added two RJ-45 SFP Modules. 
 

So first the question is it possible to use LAG with SFP-Modules on TL-SG3428MP?

 

In Omada Controller V6 Webinterface it is not possible to setup LAG for those ports. Only if you first select an other port which is not SFP. In iOS App it is possible to setup LAG for SFP Modules. 
 

So there is an BUG, in App (API) or Webinterface from Controller. But what is physical possible with this setup?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:LAG with SFP in Omada Controller V6-Solution
22 hours ago - last edited 22 hours ago

  @Ethan-TP 

We’ve run local reproduction tests but haven’t encountered the issue you described.
Could you share a few configuration screenshots or a short video that shows the problem in action? Seeing it firsthand will help us understand—and analyze—what’s happening.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
Recommended Solution
  0  
  0  
#5
Options
6 Reply
Re:LAG with SFP in Omada Controller V6
Friday

  @Devil1988 

 

I can configure Aggregating on an SG2210MP, both SFP ports have SFP to RJ45 Module. 

 

 

  0  
  0  
#2
Options
Re:LAG with SFP in Omada Controller V6
Friday

  @Devil1988 

 

Same thing with SG2428P but SFP port have no SFP to RJ45 module.

 

  0  
  0  
#3
Options
Re:LAG with SFP in Omada Controller V6
Friday - last edited Friday

  @Devil1988 

Could you share some configuration screenshots? Also, what’s the exact model of the RJ45-SFP module you’re using?

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#4
Options
Re:LAG with SFP in Omada Controller V6-Solution
22 hours ago - last edited 22 hours ago

  @Ethan-TP 

We’ve run local reproduction tests but haven’t encountered the issue you described.
Could you share a few configuration screenshots or a short video that shows the problem in action? Seeing it firsthand will help us understand—and analyze—what’s happening.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
Recommended Solution
  0  
  0  
#5
Options
Re:LAG with SFP in Omada Controller V6
15 hours ago

  @Ethan-TP Sorry for the late response, I tried to reproduce the issue. As after I took all my courage and enabled LAG on Mobile App. It was 100% possible to use in Webinterface the same like in the App. Also after deleting LAG, I still could switch the Profile end enable Aggregation for those Ports.

 

Before this, there only have the radio buttons for Switching and Mirroring. But now it works. The next time I'll see something like this I will make an Screenshot.

 

Thanks for checking!

  0  
  0  
#6
Options
Re:LAG with SFP in Omada Controller V6
5 hours ago

  @Devil1988 

Alright, please pay close attention and provide feedback if any issues arise.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 107

Replies: 6

Tags

Configuration Controller
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.