Loggin failed

Loggin failed

Loggin failed
Loggin failed
2025-11-28 13:48:04 - last edited 2025-12-07 09:53:44
Model: Archer AX1800  
Hardware Version:
Firmware Version:

Trying to loggin but comes up with failed message

  0      
  0      
#1
Options
1 Accepted Solution
Re:Loggin failed-Solution
2025-12-01 06:36:26 - last edited 2025-12-07 09:53:44

Hello @Nic-Ron3 ,

Welcome to our community.

 

Please ensure you are using the correct administrator password. When accessing the router's web interface or using the Tether app for the first time, you need to enter the router's administrator password (not your TP-Link ID or Wi-Fi password). If you have forgotten this password, you will need to reset the router to its factory default settings.

 

If you still have trouble accessing the web interface, try these additional steps:
• Reboot the router.
• Make sure your device is connected to the main network of the router.
• Use "Incognito mode" or "Private mode" in your browser.
• Try logging in from a different device.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Loggin failed-Solution
2025-12-01 06:36:26 - last edited 2025-12-07 09:53:44

Hello @Nic-Ron3 ,

Welcome to our community.

 

Please ensure you are using the correct administrator password. When accessing the router's web interface or using the Tether app for the first time, you need to enter the router's administrator password (not your TP-Link ID or Wi-Fi password). If you have forgotten this password, you will need to reset the router to its factory default settings.

 

If you still have trouble accessing the web interface, try these additional steps:
• Reboot the router.
• Make sure your device is connected to the main network of the router.
• Use "Incognito mode" or "Private mode" in your browser.
• Try logging in from a different device.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: △New Firmware Update for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △Tether KidShield Test Recruitment - Safeguarding Children's Online Experience If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options