Internet connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi I have set up the above range extender. Tether checks the signal and confirms that it is in an ideal location, the device says that it is working fine and then it just says "no internet" I click on it and it says that it is working fine again and then shortly after no internet again.
what is going on?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello@Razorman ,
Welcome to our community.
May I know what the model number of your device is? Please refer to
How to find the model number of your TP-Link device
Here are some troubleshooting steps for your case:
1. Check the extender's LED status:
• If only the power light is on or the signal light is red:
• Make sure the extender is within the Wi-Fi range of your main router. Try moving it closer to the router.
• Restart both your router and the extender.
• Perform a hard reset on the extender and set it up again.
• If the signal/2.4G/5G lights are on:
• Confirm your router's Wi-Fi is working properly for other devices.
• Restart both your router and extender.
• Update the extender's firmware to the latest version.
• Disable any MAC address filtering or Access Control features on your router, as these may block the extender. If you need help with this, please contact your router's support.
• Check the IP address assigned to the extender and your devices. If they are not in the same network segment, enable the DHCP server on the extender. You can find detailed instructions here: What's the solution if my TP-Link range extender can't connect to my router properly?
- Copy Link
- Report Inappropriate Content
Hello@Razorman ,
Welcome to our community.
May I know what the model number of your device is? Please refer to
How to find the model number of your TP-Link device
Here are some troubleshooting steps for your case:
1. Check the extender's LED status:
• If only the power light is on or the signal light is red:
• Make sure the extender is within the Wi-Fi range of your main router. Try moving it closer to the router.
• Restart both your router and the extender.
• Perform a hard reset on the extender and set it up again.
• If the signal/2.4G/5G lights are on:
• Confirm your router's Wi-Fi is working properly for other devices.
• Restart both your router and extender.
• Update the extender's firmware to the latest version.
• Disable any MAC address filtering or Access Control features on your router, as these may block the extender. If you need help with this, please contact your router's support.
• Check the IP address assigned to the extender and your devices. If they are not in the same network segment, enable the DHCP server on the extender. You can find detailed instructions here: What's the solution if my TP-Link range extender can't connect to my router properly?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 329
Replies: 1
Voters 0
No one has voted for it yet.