Tp-Link AX12 fiber kurulum sorunu
Tp-link AX12 modem var fiber internet için kurulum yapıyorum ama internet yok yazıyor ve modem de internet kırmızı yanıyor acaba ne yapacam internet firması türknet kullanıyorum
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @EgeArk- ,
Welcome to our community.
According to Google Translate, your question is that your Archer AX12 has no internet connectivity after the initial configuration. If there is any discrepancy, please describe it in English.
Please note that Archer AX12 is a wireless router, which is why I transferred your case to the Wi-Fi Routers Board. If you need a modem, could you check whether you bought the right one?
For no internet connection, please refer to the following suggestions:
1. Determine whether your router or ISP is the issue by connecting your PC directly to the modem to test internet access. If the Internet is not working, please get in touch with your Internet service provider (ISP).
2. Turn off the Modem and the Router, then power on the Router. Could you turn on the modem once the router is fully powered on?
3. Log in to the web UI via http://tplinkwifi.net and follow the Quick Setup to set it up.
4. Please go to Advanced > Network > Internet > Mac Clone to clone the MAC address of your PC. How do I configure MAC Address Clone on my TP-Link Archer Router?
- Copy Link
- Report Inappropriate Content
“When I set up the TP-Link AX12 for fiber, at the end of the installation it says there is no internet during the internet test. When I press skip, it takes me to the settings section and it shows ‘Weak Network’. It shows ‘Weak Network’ when I enter PPPoE, and it also shows ‘Weak Network’ when I use Dynamic IP. And there is still no internet. The TP-Link AX12 is connected to the ONT device, by the way.”
- Copy Link
- Report Inappropriate Content
Hello @EgeArk- ,
Thanks for getting back to me.
Please try to change DNS server on router to 8.8.8.8 and 8.8.4.4, referring to How to Change the DNS servers on the wireless router?
If there are any error messages, please take screenshots and send them here.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 65
Replies: 3
Voters 0
No one has voted for it yet.