Home Network Community > Wi-Fi Routers > TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
< Wi-Fi Routers

TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works

TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works

TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
16 hours ago
Tags: #EasyMesh
Model: Archer BE230  
Hardware Version: V2
Firmware Version: 1.0.4

Hi everyone, I need help understanding an issue with my mesh setup.

 

My setup:

 

ISP router: ZTE F609

 

Main router: TP-Link BE230 (connected via LAN from ISP → WAN on BE230)

 

Second BE230 added as a wireless EasyMesh node (let’s call it “node”)

 

Internet works fine on both routers

 

 

The problem:

On the node, the globe/internet LED randomly turns red for a few seconds, then goes back to white.

 

Internet does NOT drop when this happens.

 

I even tried Ethernet backhaul (LAN from main → LAN on node). The LED still turns red sometimes, so I switched back to wireless.

 

When the LED turns red, I connected a laptop directly to the node’s LAN port, and kept pinging 8.8.8.8 → 0 packet loss. Internet continues working normally.

 

 

So why does the LED keep turning red if the WAN/internet connection is actually fine?

 

Additional info:

 

The node’s system log shows constant LED controller entries, sometimes multiple per second:

 

 

2025-12-11 13:17:20 Led Controller INFO [2090] Start to run WAN1_ON

2025-12-11 13:17:20 Led Controller INFO [2090] Start to run WAN0_OFF

2025-12-11 13:17:14 Led Controller INFO [2090] Start to run WAN1_OFF

2025-12-11 13:17:14 Led Controller INFO [2090] Start to run WAN0_ON

2025-12-11 13:12:43 Led Controller INFO [2090] Start to run WAN1_ON

2025-12-11 13:12:43 Led Controller INFO [2090] Start to run WAN0_OFF

2025-12-11 13:12:28 Led Controller INFO [2090] Start to run WAN1_OFF

2025-12-11 13:12:28 Led Controller INFO [2090] Start to run WAN0_ON

...

 

Has anyone seen this before?

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
5 hours ago

  @HendraLink 

 

Try updating the router FW to Archer BE230(EU)_V2_1.1.0 Build 20250718 from here and test if there's any improvement.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
5 hours ago - last edited 5 hours ago

Thank you for the reply, Just want to make sure. 

1. is it okay to update the firmware from that link? (en) Because i'm from Indonesia, and when i change the URL from "en" to "id", the firmware only has BE230 V1 here's the "id" url
https://www.tp-link.com/id/support/download/archer-be230/#Firmware

2. I should update this on both of the router, correct?

  0  
  0  
#3
Options
Re:TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
4 hours ago - last edited 4 hours ago

  @HendraLink 

 

Look at the router bottom sticker to check its HW version and FW region first - details.

If it's with an (EU) region FW then proceed with the upgrade on both devices from the link I posted (don't change the URL).

If it's with a (US) region FW you're most probably with the latest FW version 1.0.4.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options
Re:TP-Link BE230 EasyMesh - Internet LED randomly turns red, but internet still works
4 hours ago

  @terziyski 

I checked both of my BE230 routers, and it says US/2.0.
So i'm already on the latest firmware version, correct?

Is there anything that i can do?

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 66

Replies: 4

Tags

EasyMesh
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.