Business Community > Switches > ES205G still does not show client IP addresses
< Switches

ES205G still does not show client IP addresses

ES205G still does not show client IP addresses

ES205G still does not show client IP addresses
ES205G still does not show client IP addresses
Yesterday - last edited 2 hours ago
Tags: #Configuration #Firmware Update #Controller
Model: ES205GP  
Hardware Version: V1
Firmware Version:

I have read several articles about ES205G / GP not showing IP addresses of connected clients when working in controller mode. Sadly, issue still persists, because recently I installed ES205G in my network, adopted it through controller and... bang, I can't see the address of some clients:

 

 

SharpTV - connected to SG2218 - fine.

SharpTV2 - connected to ES205G, not fine.

 

Setup: ER605->SG2218->ES205G, OC200 plugged directly into the router.

 

So, do we have any updates? Any future plans to get it working properly? 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ES205G still does not show client IP addresses-Solution
Yesterday - last edited 2 hours ago

  Hi @Happy_x50 , it is limit by chipset resource, it is basically the same with unmanaged switch, you can check this. Agile Switches vs. Access Switches: Which Omada Switch Do You Need? - Business Community

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:ES205G still does not show client IP addresses-Solution
Yesterday - last edited 2 hours ago

  Hi @Happy_x50 , it is limit by chipset resource, it is basically the same with unmanaged switch, you can check this. Agile Switches vs. Access Switches: Which Omada Switch Do You Need? - Business Community

Recommended Solution
  0  
  0  
#2
Options
Re:ES205G still does not show client IP addresses
Yesterday

  @Penry.huang 

 

That is so sad! There are plenty of places to pull client ip from in this case - ip-mac binding for example.

 

Any future plans to deal with it one way or another? Lack of client ip is funny and annoying at the same time.

  0  
  0  
#3
Options
Re:ES205G still does not show client IP addresses
Yesterday

  @Happy_x50 Sorry, it is limit by chipset, you may see the ip of downlink client by check gateway ip client list. Also if you want ip-mac binding, ES205G also don't support it. You may need use other switch like SG2008.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 39

Replies: 3

Tags

Configuration Firmware Update Controller
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.