Wifi extender
The power, wireless and RE lights are flashing but i can't get them to go solid in order to start it up. I've tried resetting it and it just does the same thing. What do i do please? Also because they're not solid it won't let me connect to its wifi
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Oliviamoorby ,
Welcome to our community.
Here are some steps you can try:
1. Try a Different Power Socket:
Plug your Range Extender into another power outlet to rule out any issues with the current socket.
2. Perform a Proper Reset:
With the extender powered on, use a pin to press and hold the reset pinhole. Hold it until all the lights turn on for about one second, then go off. This ensures a full reset.
If the suggestions above don't help,please contact TP-Link Technical Support for further assistance.
- Copy Link
- Report Inappropriate Content
Hello @Oliviamoorby ,
Welcome to our community.
Here are some steps you can try:
1. Try a Different Power Socket:
Plug your Range Extender into another power outlet to rule out any issues with the current socket.
2. Perform a Proper Reset:
With the extender powered on, use a pin to press and hold the reset pinhole. Hold it until all the lights turn on for about one second, then go off. This ensures a full reset.
If the suggestions above don't help,please contact TP-Link Technical Support for further assistance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 228
Replies: 1
Voters 0
No one has voted for it yet.