TP-Link

TP-Link

TP-Link
TP-Link
2026-01-13 10:46:06 - last edited 3 weeks ago
Model: TL-WR941HP  
Hardware Version: V2
Firmware Version: 22072D2000832

Da wifi quitándole  la red. al modem de red óptica principal 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:TP-Link -Solution
2026-01-20 08:26:07 - last edited 3 weeks ago

Hello @CARDONA ,

Welcome to our community.

 

According to Google Translate, your question is that your wireless connection is unstable. If there is any discrepancy, please describe it in English.

First of all, please check your Internet Connection Stability:
• Connect a computer directly to your optical modem to verify if your Internet service from your provider is stable.
• If the Internet is unstable even when connected directly to the modem, please contact your Internet Service Provider.


If the wired connection is stable, please try Optimize Wireless Settings as below:
• Place the router in an open area, away from cabinets or shelves, to improve Wi-Fi coverage.
• In the web interface, go to Advanced > Wireless > Wireless Settings, and try different Wi-Fi channels to avoid interference from nearby networks.
• For 2.4GHz devices, set the channel width to 20MHz.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:TP-Link -Solution
2026-01-20 08:26:07 - last edited 3 weeks ago

Hello @CARDONA ,

Welcome to our community.

 

According to Google Translate, your question is that your wireless connection is unstable. If there is any discrepancy, please describe it in English.

First of all, please check your Internet Connection Stability:
• Connect a computer directly to your optical modem to verify if your Internet service from your provider is stable.
• If the Internet is unstable even when connected directly to the modem, please contact your Internet Service Provider.


If the wired connection is stable, please try Optimize Wireless Settings as below:
• Place the router in an open area, away from cabinets or shelves, to improve Wi-Fi coverage.
• In the web interface, go to Advanced > Wireless > Wireless Settings, and try different Wi-Fi channels to avoid interference from nearby networks.
• For 2.4GHz devices, set the channel width to 20MHz.

Recommended Solution
  0  
  0  
#2
Options