Istallazione

Istallazione

Istallazione
Istallazione
2026-01-25 09:44:50 - last edited 2026-02-10 07:15:17
Model: RE505X  
Hardware Version:
Firmware Version:
Caption

 

0
0
#1
1 Accepted Solution
Re:Istallazione -Solution
2026-01-28 08:46:25 - last edited 2026-02-10 07:15:17

Hello @MimaV ,

Welcome to our community.

 

It seems that you are experiencing a login failure when trying to access your Range Extender, and you are being asked to try again if the problem persists.

Here are some steps you can try:

1. Forget all saved WiFi networks on your phone, then reconnect to the Range Extender's Wi-Fi and try opening the Tether app again. For detailed instructions, you can refer to How to remove existing wireless network profile on Android&iPhone.
2. Try logging in with another smartphone or tablet to see if the issue is specific to your current device.
3. Power cycle the extender by unplugging it for about 30 seconds, then plug it back in and wait for it to fully restart.
4. If the problem continues, reset the extender to factory settings. During setup, make sure to configure it with a Wi-Fi name (SSID) different from your main router to avoid conflicts.

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#4
3 Reply
Re:Istallazione
2026-01-25 09:45:24

  @MimaV 

0
0
#2
Re:Istallazione
2026-01-25 09:45:40

  @MimaV 

0
0
#3
Re:Istallazione -Solution
2026-01-28 08:46:25 - last edited 2026-02-10 07:15:17

Hello @MimaV ,

Welcome to our community.

 

It seems that you are experiencing a login failure when trying to access your Range Extender, and you are being asked to try again if the problem persists.

Here are some steps you can try:

1. Forget all saved WiFi networks on your phone, then reconnect to the Range Extender's Wi-Fi and try opening the Tether app again. For detailed instructions, you can refer to How to remove existing wireless network profile on Android&iPhone.
2. Try logging in with another smartphone or tablet to see if the issue is specific to your current device.
3. Power cycle the extender by unplugging it for about 30 seconds, then plug it back in and wait for it to fully restart.
4. If the problem continues, reset the extender to factory settings. During setup, make sure to configure it with a Wi-Fi name (SSID) different from your main router to avoid conflicts.

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
0
0
#4