Home Network Community > Wi-Fi Routers > HB710 and BE805 - Easy Mesh
< Wi-Fi Routers

HB710 and BE805 - Easy Mesh

HB710 and BE805 - Easy Mesh

HB710 and BE805 - Easy Mesh
HB710 and BE805 - Easy Mesh
a week ago
Model: Archer BE805  
Hardware Version: V1
Firmware Version: 1.3.1 Build 20250915 rel.62093(5347)

Hi

 

Problem: TP-Link HB710 + Archer BE805 EasyMesh 6GHz SSID _EXT Issue

 

Network Configuration

  • Main Router: TP-Link HB710 (StarHub ISP variant, BE18000 Tri-Band Wi-Fi 7) (Firmware: 0.2.0 3.0.0 v60be.0 Build 250418 Rel.52378n / Hardware Version:HB710 v1.0)

  • Satellite: TP-Link Archer BE805 (BE19000 Tri-Band Wi-Fi 7 router) configured as EasyMesh satellite (Firmware: 1.3.1 Build 20250915 rel.62093(5347) / Hardware Version: v1.0)

  • Backhaul: Ethernet (wired connection verified)

  • Issue: BE805 6GHz SSID broadcasts as "[NetworkName]_EXT" instead of unified SSID matching HB710

 

Observed Behavior

HB710 identifies BE805 as OneMesh extender rather than EasyMesh satellite router, triggering _EXT suffix on 6GHz band only. 2.4GHz/5GHz SSIDs remain unified. Ethernet backhaul connection confirmed active in HB710 EasyMesh topology view.

 

This there anyway to make the 6Ghz SSID unified since both HB710 and BE805 are fully Easymesh supported?

 

Better still, unified MLO SSID will be great.

 

 Thanks

  0      
 
  0      
 
#1
Options
4 Reply
Re:HB710 and BE805 - Easy Mesh
a week ago

Hello @PandaJas ,

Welcome to our community.

 

It has been confirmed that the Archer BE805 currently does not support extended 6G and MLO networks.

 

Additionally, the HB710 is an ISP-customized device. Its EasyMesh component may differ from the Archer BE805's due to firmware differences, which could be causing the Archer BE805 to be incorrectly displayed as a OneMesh device.

 

If this does not affect your network usage, I suggest you patiently wait for a future firmware update.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#2
Options
Re:HB710 and BE805 - Easy Mesh
a week ago

  @Joseph-TP 

 

Thanks for responding.

 

Seems like waiting for firmware upgrade is the only path currently.

 

When will the next upgrade cycle will be for both models? Looking at the HB710 firmware that was installed, it suggested that it is at least 10 months old. That's a long waiting time.

 

 

  0  
  0  
#3
Options
Re:HB710 and BE805 - Easy Mesh
a week ago

Hello @PandaJas ,

We also do not have a firmware update schedule for these two models. For the HB710, please note that it is an ISP-customized device. You can also try contacting Local Support.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#4
Options
Re:HB710 and BE805 - Easy Mesh
a week ago

  @Joseph-TP 

 

Thanks for the update.

 

May I know what can the local support can advise? Wait for firmware upgrade??

 

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 166

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.