SFP+ Flow Control Beta Firmware".

SFP+ Flow Control Beta Firmware".

SFP+ Flow Control Beta Firmware".
SFP+ Flow Control Beta Firmware".
Saturday - last edited 18 hours ago
Tags: #SFP+
Model: Archer GE800  
Hardware Version: V1
Firmware Version: 1.3.2

Hi, I have an upload problem, my internet is 8Gb down and up, but upload does not exceed 2Gb. After research, it appears that I have SFP+ Flow Control. If not, I could get a Beta Firmware".

  0      
  0      
#1
Options
4 Reply
Re:SFP+ Flow Control Beta Firmware".
10 hours ago

Hello @Pro-gamer ,

Thanks for contacting our community.

 

Have you confirmed the Internet plan with your ISP? Is it both 8 Gbps for upload and download speeds?

If possible, please use a different client to test the speed directly from the ISP device.

 

  0  
  0  
#2
Options
Re:SFP+ Flow Control Beta Firmware".
10 hours ago

  @Joseph-TP Thank you for your answer, I have tested my own provider modem and there is a normal upload of 8 GB, but I use my own FS XGS-ONU-25-20NI, there I get down 8 GB, up 2 GB, from research it appears that the router does not support SFP + Flow Control, the upload problem remains. If a router supports SFP + then it should have its function.

  0  
  0  
#3
Options
Re:SFP+ Flow Control Beta Firmware".
7 hours ago

  @Pro-gamer @Joseph-TP 

 

could your low upload speed has something to do with the problem discussed in this: https://community.tp-link.com/en/home/forum/topic/851396?sortDir=DESC&page=1 thread?

  0  
  0  
#4
Options
Re:SFP+ Flow Control Beta Firmware".
6 hours ago

  @Bluefish91 As I said before, many people don't know, but if you do thorough research, you'll find out about Flow Control. If this isn't supported, you won't get an upload higher than 1GB or 2GB.

  0  
  0  
#5
Options