Hi 

I was hoping someone would be able to offer some assistance.

I have a TP Link M7350 (EU) V8, however, when turning this on, this fails to get past the logo, the cycle reboots.

The steps I have tried:

1) Leaving the device off, without battery in for 12hrs+

2) Holding down the reset button with a pin for varying amounts of time

3) Firmware recover (Link) - You can hear the device connect and disconnect from the laptop when plugged in. The Error I get via the program: "device 1：get fastboot handle failed!"  - It feels like the device is stuck in a reboot cycle and therefor not active long enough to be able to apply the firmware fix

Any other suggestions would be greatly appreciated ...

Cheers