Can RE235BE handle high moisture and low temperatures?

Can RE235BE handle high moisture and low temperatures?

Can RE235BE handle high moisture and low temperatures?
Can RE235BE handle high moisture and low temperatures?
3 weeks ago
Model: RE235BE  
Hardware Version: V7
Firmware Version:

I have poor signal range in my car garage and want to use a WiFi extender in there.

But the garage is not isolated or heated.

My question is:

Can the RE235BE unit handle high humidity/moisture and/or freezing temperatures.?

The unit will newer be in direct water contact. eg. rain etc.

thank you for info.

0
0
#1
2 Reply
Re:Can RE235BE handle high moisture and low temperatures?
3 weeks ago

Hello @Supercharger ,


According to our knowledge base, the RE235BE has a specified operating temperature range of 0°C to 40°C (32°F to 104°F) This means the device is not rated to operate in freezing temperatures (below 0°C). In an unheated garage during winter, temperatures can easily drop below this threshold, which could lead to malfunction or even permanent damage to the unit.

The RE235BE operates within a humidity range of 10% to 90% (non-condensing). And it is a standard indoor consumer device and is not designed or rated for high-humidity environments. Unheated garages can experience significant condensation and moisture buildup, especially during temperature fluctuations, which can pose a risk to the device's internal electronics, even without direct water contact.

For these reasons, using the RE235BE in an unheated, non-insulated garage is not recommended, as the environmental conditions may fall outside the device's safe operating parameters and could void the warranty.

If you need Wi-Fi coverage in such an environment, you may want to consider solutions specifically designed for harsh or outdoor conditions, such as TP-Link's outdoor access points (e.g., the EAP series outdoor models), which are built to handle a wider range of temperatures and weather conditions. You can visit the Business Community. Or contact the local support.

Welcome to Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click Or ☆Recommended Solution if the post/answer helps.
0
0
#2
Re:Can RE235BE handle high moisture and low temperatures?
3 weeks ago

  @Supercharger  Thank you for the reply. i will check EAP series out. :)

thank you for info.

1
1
#3