Wi-Fi is more stable than Ethernet

Wi-Fi is more stable than Ethernet

Wi-Fi is more stable than Ethernet
Wi-Fi is more stable than Ethernet
2 weeks ago - last edited Yesterday
Tags: #Network Connectivity #Stability
Model: Archer BE3600  
Hardware Version: V1
Firmware Version: 1.2.5 Build 20260108 rel.68570(4555)

Hi, i have problem with stability of ethernet connection - from the PC perspective i'm physically losing connection.

 

What exactly happens:

I'm getting disconnected from router (not from internet, from router - can't even access default gateway).

Usually it lasts +/- 1s, but can happen few times in a row. 

These reconnections usually happens for few minutes then stop for some time (2h ~ 12h).

I don't remember even one occurrence of this on Wi-Fi.

 

What i tried:

Changed cabled → nothing changed

Updated Realtek Driver (to version from producent site) → nothing changed

Updated router firmware → nothing changed

Turned off all energy-saving settings in driver → nothing changed

Tested on other PC (using other cable) → Same problem as on my own PC

 

Some of my settings:

Internet Connection Type: PPPoE (optical fiber)

Online Duration: 2 days 4 hours 7 minutes (didn't disconnect)

UPnP: On

Firewall: On

ALG: Off

Almost everyhing else: Off

 

Log from today:

2026-05-19 22:31:50 Led Controller INFO [1985] Start to run WAN1_ON

2026-05-19 22:31:50 Led Controller INFO [1985] Start to run WAN0_OFF

2026-05-19 22:31:50 Led Controller INFO [1985] Start to run LAN_ON

2026-05-19 22:31:45 Led Controller INFO [1985] Start to run WAN1_ON

2026-05-19 22:31:45 Led Controller INFO [1985] Start to run WAN0_OFF

2026-05-19 22:31:45 Led Controller INFO [1985] Start to run LAN_OFF

  0      
0
#1
Options
1 Accepted Solution
Re:Wi-Fi is more stable than Ethernet-Solution
Yesterday - last edited Yesterday

Hello  @Miki4625 ,

Thanks for contacting our community.

 

Since the problem is isolated to wired connections and persists across multiple devices and cables, here are some additional steps to try:
1. Check the Ethernet lights on the router during a drop — Next time a disconnection occurs, observe whether the LAN port LED on the router also goes off momentarily. If it does, this points to a potential hardware issue with the LAN port(s) on the router itself.
2. Try a different LAN port — If your router has multiple LAN ports, switch to a different one and see if the intermittent drops continue.
3. Reboot both your PC and the router — A fresh restart of both devices can sometimes clear up transient connectivity issues.
4. Check IP configuration — Make sure your wired device is set to obtain an IP address automatically:
   • On Windows: Go to Network Connection Details and confirm "DHCP enabled" is set to "Yes."
   • On Mac: Go to Network > Advanced and confirm "Configure IPv4" is set to "Using DHCP."
5. Test with a network switch in between — If you have a small network switch available, try connecting your PC to the router through the switch. If the drops disappear, this further isolates the issue to the router's LAN port(s).

 

Best Regards.
 

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
0
#5
Options
4 Reply
Re:Wi-Fi is more stable than Ethernet
2 weeks ago

  @Miki4625 

 

Best approach regarding the cable is to use the one included in the router kit or a good quality factory made CAT 5E cable.

It seem like a faulty cable or a faulty router LAN port. Did you check to connect your PC to another LAN port and test the stability.

In case of a faulty port you should contact your local support for further assistance.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue as a "Recommended Solution". BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
  1  
1
#2
Options
Re:Wi-Fi is more stable than Ethernet
2 weeks ago

  @terziyski 

I'm using some old cables right now but i tested it on new CAT 8 (1m) and still did happen. And ofc i tried switching just ports. Right now 2 PCs are connected (with 2 different cables and ports) but still the same happens for both PCs. The most weird thing is "when" this happens. I can use internet for whole day and nothing - i'm usually connected to VPN while working, which disconnects when my connection to internet fails and it can be running for hours and nothing, then for few minutes i can't use ethernet at all, because its non stop reconnecting.

  0  
0
#3
Options
Re:Wi-Fi is more stable than Ethernet
2 weeks ago

  @Miki4625 

 

Well these home routers don't need anything above CAT 5E, so I would bet on the ethernet cable that you're using.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue as a "Recommended Solution". BTC:149wubkkfoLmNDjDbiTxx4ZU8mpcMA5CJt
  0  
0
#4
Options
Re:Wi-Fi is more stable than Ethernet-Solution
Yesterday - last edited Yesterday

Hello  @Miki4625 ,

Thanks for contacting our community.

 

Since the problem is isolated to wired connections and persists across multiple devices and cables, here are some additional steps to try:
1. Check the Ethernet lights on the router during a drop — Next time a disconnection occurs, observe whether the LAN port LED on the router also goes off momentarily. If it does, this points to a potential hardware issue with the LAN port(s) on the router itself.
2. Try a different LAN port — If your router has multiple LAN ports, switch to a different one and see if the intermittent drops continue.
3. Reboot both your PC and the router — A fresh restart of both devices can sometimes clear up transient connectivity issues.
4. Check IP configuration — Make sure your wired device is set to obtain an IP address automatically:
   • On Windows: Go to Network Connection Details and confirm "DHCP enabled" is set to "Yes."
   • On Mac: Go to Network > Advanced and confirm "Configure IPv4" is set to "Using DHCP."
5. Test with a network switch in between — If you have a small network switch available, try connecting your PC to the router through the switch. If the drops disappear, this further isolates the issue to the router's LAN port(s).

 

Best Regards.
 

Welcome to Our Community! Get the latest posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware Releases for Archer BE805 V1/BE450 V1 to Support VPN Merge, New ECO Mode, and More! More posts, please see: △ Get the Ongoing Pre-release Firmware for Wi-Fi Routers Here— Subscribe for Updates! Urgent problems with your Wi-Fi Router, Range Extender, or DSL Modem? Please reach out via private Messages or @Joesph-TP in your new thread directly. Click Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
0
#5
Options