In game ping increased from 36–38 ms to 52–55 ms after BIOS update + Ryzen 2600 to 5600 upgrade.

In game ping increased from 36–38 ms to 52–55 ms after BIOS update + Ryzen 2600 to 5600 upgrade.

In game ping increased from 36–38 ms to 52–55 ms after BIOS update + Ryzen 2600 to 5600 upgrade.
In game ping increased from 36–38 ms to 52–55 ms after BIOS update + Ryzen 2600 to 5600 upgrade.
Monday
Tags: #Windows 11 #High latency after upgrade
Model: Archer T4E  
Hardware Version: V3
Firmware Version: N/A

System

  • Motherboard: ASRock B450M-HDV R4.0

  • Old CPU: AMD Ryzen 5 2600

  • New CPU: AMD Ryzen 5 5600

  • GPU: AMD RX 6600

  • Wi-Fi Adapter: TP-Link Archer T4E v3

  • Driver Version: 2024.10.143.0
    Also, my spelling is not the b​​​​​​est so I used a bit of AI to fix it. Sorry for that.

What Changed

I updated my motherboard BIOS from 3.70 to 4.10 in preparation for upgrading from a Ryzen 5 2600 to a Ryzen 5 5600.

To install the CPU and cooler I had to:

  • Remove the GPU

  • Install the new CPU

  • Install the cooler

  • Reinstall the GPU

After the upgrade I noticed my League of Legends EUNE ping increased from a stable 36–38 ms to a stable 52–55 ms.

The strange part is that the connection remains stable. It isn't fluctuating wildly. It just seems consistently higher than before.

Current Windows reports:

SSID: ELTX-2.4GHz_WiFi_C3DC

Protocol:

  • Wi-Fi 4 (802.11n)

Band:

  • 2.4 GHz

Channel:

  • 5

Link Speed:

  • 300/300 Mbps

Signal appears stable.

Speed Tests

Download:

  • 111.86 Mbps

Upload:

  • 98.20 Mbps

Idle Latency:

  • 5 ms

Download Latency:

  • 136 ms

Upload Latency:

  • 74 ms

ISP:

  • ST CABLE

  • SAT-TRAKT

  • Becej, Serbia

Router Settings (2.4 GHz)

Basic Settings

Band: 2.4 GHz (B+G+N)

Mode: AP

Channel Width: 40 MHz

Control Sideband: Upper

Channel: 5

Radio Power: 100%

Regdomain: RUSSIAN(12)

Advanced Settings

Fragment Threshold:

  • 2346

RTS Threshold:

  • 2347

Beacon Interval:

  • 100

Data Rate:

  • Auto

Preamble:

  • Long

Client Isolation:

  • Disabled

Protection:

  • Disabled

Aggregation:

  • Enabled

Short GI:

  • Enabled

TX Beamforming:

  • Enabled

MU-MIMO:

  • Disabled

Multicast to Unicast:

  • Enabled

Band Steering:

  • Disabled

WMM:

  • Enabled

802.11k:

  • Enabled

802.11v:

Enabled

Archer T4E Advanced Device Manager Settings

802.11b:

  • Enabled

Beacon Interval:

  • 100

Current Operation Preference:

  • Disabled

MAC Randomization:

  • Disabled

Multi-Channel Concurrent:

  • Disabled

Preamble Mode:

  • Long Only

PreferBandRSSIThreshold:

  • 25

Preferred Band:

  • 2.4 GHz First

Wake On Magic Packet:

  • Disabled

Wake On Pattern Match:

  • Disabled

Wireless Mode:

  • IEEE 802.11 b/g/n

Other Things I Noticed

  • One Wi-Fi disconnect occurred while playing Dark Souls 3.

  • During that event the game stuttered and audio froze briefly.

  • Windows then asked for the Wi-Fi password again on the 2.4 GHz network.

  • 5 GHz continued to work.

I also tested the Archer T4E antennas and both appear functional.

I previously used a Tenda USB Wi-Fi adapter before installing the Archer T4E. Some old Tenda drivers may still exist on the system.

Main Questions

Can a BIOS update or CPU swap realistically affect networking in a way that causes a stable ping increase without obvious packet loss?

Could removing and reinstalling the GPU during the CPU upgrade have affected the PCIe Wi-Fi card somehow?

Does anything in my traceroute indicate a routing change between my ISP and Riot?

Is there any reason to suspect a motherboard issue, PCIe issue, or Archer T4E issue?

Has anyone seen League of Legends EUNE routing change recently causing an increase from ~38 ms to ~52 ms?

Additional Testing Performed

Before suggesting basic Wi-Fi optimizations, please note I already tested the following extensively:

Archer T4E Device Manager Tests

  • Changed Wireless Mode from IEEE 802.11 b/g/n to:

    • IEEE 802.11b only

    • IEEE 802.11b/g

  • No change in League of Legends ping (remained ~52–55 ms).

Router Tests

  • Changed Channel Width from 40 MHz to 20 MHz.

  • Changed Channel Number to 1.

  • Tested multiple other channels as well.

  • These settings sometimes improved stability or reduced spikes, but did not reduce the actual average ping, which remained around 52–55 ms.

Important Observation

  • Regardless of router channel, channel width, or Archer T4E wireless mode settings, the ping remains consistently around 52–55 ms.

  • The issue is not random spikes or packet loss; it is a stable increase compared to the previous stable 36–38 ms before the BIOS update and CPU swap.

  1      
1
#1
Options
1 Reply
Re:In game ping increased from 36–38 ms to 52–55 ms after BIOS update + Ryzen 2600 to 5600 upgrade.
6 hours ago - last edited 6 hours ago

  @Overlord666665 I experienced the same thing after a hardware upgrade, so you're not alone. JJ77 Since the ping increase is stable, it could be related to routing or the Wi-Fi adapter rather than the new CPU itself. I'd also try removing any old Tenda drivers and testing with Ethernet if possible to compare. Please update us if you find the root cause, as it could help others with similar upgrades.

  0  
0
#2
Options