MR200 IPSEC VPN Will Not Passthough

Re:MR200 IPSEC VPN Will Not Passthough
2017-11-09 16:52:16
Archer MR200v1_0.9.1_0.0_up_boot(151105)_full_update_1023_1015.bin

the newest from the support page.
the funny thing is if i copy it into the post, everytime the moderator will delete the firmware version...

is it possible to load the bin into the router via telnet?
0
0
#43
Options
Re:MR200 IPSEC VPN Will Not Passthough
2017-11-09 17:57:32
151105 is very old one.
Suggest you to upgrade to 160310 first, then upgrade to 160706.
http://www.tp-link.com/en/download/Archer-MR200_V1.html#Firmware
http://static.tp-link.com/res/down/s...eta_160706.zip
0
0
#44
Options
Re:MR200 IPSEC VPN Will Not Passthough
2017-11-10 14:55:58
oh no i figured out that i am on the newest Firmware
Archer MR200v1_0.9.1_1.1_up_boot_v004a.0 Build 160905 Rel.60037n

ipsec not possible and not possible to downgrade to the beta Firmware (issue 71211)
0
0
#45
Options
Re:MR200 IPSEC VPN Will Not Passthough
2018-02-08 15:09:00
I love TP link device
0
0
#46
Options
160706 fixes IPsec tunnel but breaks SIP
2018-07-18 06:17:48
It's true that 160706 fixes the IPsec tunnels, yet 160706 breaks SIP devices behind the Archer (only one party can hear the other), which are working perfectly with 160905.

@TP-LINK: please provide a firmware which makes both IPsec and SIP devices work properly behind the Archer.

Kind regards
Michel
0
0
#47
Options
Re:MR200 IPSEC VPN Will Not Passthough
2018-07-18 14:37:29
There is newer fimrware than 160706, you may update their official latest firmware to see whether it can get both working properly.
0
0
#48
Options
Newer FW than 160905?
2018-07-20 03:37:27

Aprilcoco wrote

There is newer fimrware than 160706, you may update their official latest firmware to see whether it can get both working properly.


Is there a newer FW than 160905? As mentioned: 160706 fixes IPsec but breaks SIP. 160905 fixes SIP byt breaks IPsec
0
0
#50
Options
Mr200
2018-10-25 08:59:40
For anyone who is interested I think this IPSEC VPN Passthrough problem is still going on.
I upgraded to the latest version and my IPSEC connection between two Cisco Routers (one at home behind the MR200 and one at the Office)
0.9.1 1.2 v004a.0 Build 180502 Rel.53881n

After a lengthy discussion on TP-Link's Chat support site I decided to downgrade to a previous version.
(They at first told me that I could not downgrade)

0.9.1 0.0 v004a.0 Build 160706 Rel.40546n

IPSEC immediately worked again. I think this version is from 2016. I went back to the chat and reported my findings.
I can't believe they are so slack about fixing known issues.

David
0
0
#51
Options
Re:MR200 IPSEC VPN Will Not Passthough
2018-10-27 14:13:42
Fixed please.
0
0
#52
Options
Re:MR200 IPSEC VPN Will Not Passthough-Solution
2020-08-15 14:02:56 - last edited 2020-08-28 08:45:39

@coatsdarlingto finally I found a way that fix this issue however its look a little like strange!

 

Follow the below steps:

 

  1. Download the v160412 firmware from the https://static.tp-link.com/res/down/soft/Archer_MR200(EU)_V1_160412.zip and update your device.
  2. After reboot, download v160706 firmware from here https://static.tp-link.com/res/down/soft/MR200_V1_Beta_160706.zip and try to update it again.
  3. As you know the error may be appeared at the previous step and before rebooting, so cancel the process and manually reboot the device by clicking on reboot icon at top right corner of web page.
  4. Now update the device to v160412 firmware aging and let it to reboot also.
  5. After rebooting, check the firmware version, now your device updated to the 0.9.1 0.0 v004a.0 Build 160706 Rel.40546n firmware!


I hope these steps could help you and others.

 

Please LIKE if you find this useful...

Recommended Solution
2
2
#53
Options