Firmwareupdate for TP-PL8030P

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1101112...

Firmwareupdate for TP-PL8030P

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
163 Reply
Re:Firmwareupdate for TP-PL8030P
2018-03-10 21:53:45
The firmware is the same, but .pib is different, I compared the same firmware versions 2.0.0 PA8010 and PA8010P - the .pib files are very different, and the .nvm files are the same
Compare yourself: https://drive.google.com/open?id=1sEIUxyserrvL1B0L9qpKHdG5n4hCwrl1

p.s. For the firmware, do I need to change the .pib under my MAC?
  0  
  0  
#102
Options
Re:Firmwareupdate for TP-PL8030P
2018-03-17 15:34:06
Where I can get this last one? Link of schroeder don't works...
  0  
  0  
#103
Options
Re:Firmwareupdate for TP-PL8030P
2018-03-28 13:03:46
Powerline PA8010 (not P) is not flashed with the tpPLC utility.
A progress bar appears briefly and after 1 second the "Update failed" message
I flash the program from PA8010P from the message Martha321 #95.
I need your help.
  0  
  0  
#104
Options
Re:Firmwareupdate for TP-PL8030P
2018-05-04 23:31:31
Wow, with the 2.4.0 firmware and 2.2.3 pib on my TL-PA8030P I get 180 mbit down and 140 up, both connected to power bars!

Here's the update I used taken from previous posts, flashed with newest TP-Link utility and make sure you reset both devices afterwards:
http://s000.tinyupload.com/index.php?file_id=89561632783003937174
  0  
  0  
#105
Options
Re:Firmwareupdate for TP-PL8030P
2018-06-16 00:14:58
Does anyone have an updated firmware for the UK version of the TL-WPA8730 (v1)?
I've update my
TL-PA8010P with the 2.2.3 firmware found here as per help from the good members of this thread, which has solved my disconnects between these two devices (I have three in total, two TL-PA8010P and one TL-WPA8730), but I'm still seeing disconnects between my primary TL-PA8010P & TL-WPA8730.

  0  
  0  
#106
Options
Re:Firmwareupdate for TP-PL8030P
2018-06-18 19:39:49
Welcome to the wonderful world of TP-Link product maintenance. Other vendors have just begun releasing firmware levels 2.5.0, even for their oldest AV1200 products.
  0  
  0  
#107
Options
Re:Firmwareupdate for TP-PL8030P
2018-06-19 01:09:03
I just finally did 2 out the 3 of mine to the 2.4, lost connectivty but looks to be better. Only issue is that they are EU not US PIBs could not find or not understand if I was supposed to use the original PIB, or if anyone made a PIB for the newer versions for US. Well at least it looks better # wise for xfer rates.

Waiting to upgrade to anything better but apartment so cant make to many wall mods, and WIFI is to congested.
  0  
  0  
#108
Options
Re:Firmwareupdate for TP-PL8030P
2018-06-19 15:59:17
With another country's PIB, you are violating your local radio emissions standards. Fat chance you are now causing interference with emergency services or police radio.
  0  
  0  
#109
Options
Re:Firmwareupdate for TP-PL8030P
2018-06-19 19:02:41

xfaith wrote

I am looking for US PIB, after reading all the info the EU version have been updated to 2.4 but US is still listed as

TL-PA8030P(US)_V1_160328 -
TL-PA8010P KIT(US)_V1_150306


a
After reading through the 6 pages it looks like its easy enough, but its states I need a PIB for US, preferably one made for 2.2 or above.

Both the ones listed above dont give a version number for the PIB like everyone else shows.
I looked into editing the PIB but thats above me.

Any help would be appreciated.

Thanks


Hey xfaith,
Here the link for both US PIB 8010P/8030P V1.


8010P V1 US PIB ( based upon the 170223 release ) - flashing procedure tested on mine 8010P
8030P V1 US PIB ( based upon the 170704 release ) - untested, if you do: USE PORT1



(socket may be different)

If you are unable to flash these files provide the screenshot of your current firmware version.
Notice: These PIBs are straight ported without any stability testing.
  0  
  0  
#110
Options
Re:Firmwareupdate for TP-PL8030P
2018-06-19 20:00:08

xer0w wrote

Does anyone have an updated firmware for the UK version of the TL-WPA8730 (v1)?
I've update my
TL-PA8010P with the 2.2.3 firmware found here as per help from the good members of this thread, which has solved my disconnects between these two devices (I have three in total, two TL-PA8010P and one TL-WPA8730), but I'm still seeing disconnects between my primary TL-PA8010P & TL-WPA8730.


xer0w

For the TL-WPA8730 provide either the string, the screenshot of your firmware version or the *device PIB.
EG:



* Download these files (PLCTOOL), read the "HOWTO" or the DOC and attach your current UK PIB somewhere.
If you are unable to fetch the device PIB: with the version string\screenshot I can make one 2.2.3+ out of the US initial release.

About the radio emissions standards, Dunno. In theory these qualcomm chip shall sense the AC rate and adapt without interference.
  0  
  0  
#111
Options