How do I connect in DHCP the mr6400 to a modem-router for adsl

How do I connect in DHCP the mr6400 to a modem-router for adsl
How do I connect in DHCP the mr6400 to a modem-router for adsl
2017-01-29 01:35:31
Model :

Hardware Version :

Firmware Version :

ISP :

I understand that the mr6400 has no adsl modem, which I need along the modem for 4g.
I have a modem-router speddtouch 585 v6 for adsl and I want to mr6400 to be connected, by ethernet, to the speddtouch 585 through DHCP, like my computer would be connected to the speddtouch 585 and receive adsl internet.

How do I achieve this with the mr6400 ?

My problem is that , whereas the mr6400 is indeed seen by the speddtouch 585 and assings a fix ip to the 6400, when i plug in the ethernet cable from the speddtouch 585 to the wan/lan of the 6400, the 6400 freezes and I cannot access the 192.168.1.1

Apparently, it would have to do with the ip assigned by the speddtouch 585 ?

this is the ipconfig/all that I get when I connect my computer to the speddtouch 585:
gateway = 192.168.1.254
subnet mask . . . . . . . . . : 255.255.255.0
Serveur DHCP . . . . . . . . . . . . . : 10.0.0.138
Serveurs DNS. . . . . . . . . . . . . : 10.0.0.138


this is the pool config of the 585 which I try to use
poolstart=10.0.0.1 poolend=10.0.0.137 netmask=24 gateway=10.0.0.138 server=10.0.0.138

but my speddtouch 585 seems to still assign ip with the default pool
poolstart=192.168.1.1 poolend=192.168.1.253 netmask=24 gateway=192.168.1.254 server=10.0.0.138

since my devices get ip addresses like 192.168.1.XXX ....


this is my mr6400 EU









Firmware Version: 1.0.12 Build 160322 Rel.33912n
Hardware Version: MR6400 v1 00000000












how do I make the two routers coexist?
0
0
#1
Options
2 Replies
Re:How do I connect in DHCP the mr6400 to a modem-router for adsl
2017-02-01 16:35:26
this is what I imagine
internet adsl => modem-router 585 +dhcp server => my computer (over wifi + ethernet)
=> the mr6400 (connected to 585 over ethernet)+ dhcp server to connect to adsl with my computer (over wifi or ethernet (likely wifi))
internet 4g => modem router mr6400 + dhcp server => my computer (over wifi or ethernet)

my problem is this error


Error code: 5008
WAN IP address and LAN IP address cannot be in a same subnet. Please input another IP address.




0
0
#2
Options
Re:How do I connect in DHCP the mr6400 to a modem-router for adsl
2017-02-05 20:02:11
So I just changed the LAN for the 6400 to 192.168 .2.44 and everything works BUT the connection ethernet computer->mr6400(router)->585(modem-router)->internet adsl takes a long time to acquire the dhcp settings form the mr6400, whereas the wifi form the computer is very fast to be connected to the mr6400 !!!
0
0
#3
Options