Configure MR200 as access point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Configure MR200 as access point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Configure MR200 as access point
Configure MR200 as access point
2017-01-30 15:34:46
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,
I have 2 Archer MR200. My house has two floors.

Upstairs I have one Archer MR200 configured as 3G/4G router. This router:

[*]is on 192.168.1.1 lan address
[*]works as DCHP server
[*]has two wirelesse SIDs (upstairs_2g and upstairs_5g)
SInce the upstairs router does not cover all downstairs rooms, I have connected the two floors with a network cable.

Now I am able to connect the second Archer MR200 with the first one through a cable.

I would like to use the downstairs router as a access point but:

[*]the DHCP server must remain the one in the upstairs router (so all devices are in the same net)
[*]the downstairs router should not have a separate SID for the wirless connesction[LIST=1]
[*]If I am downstairs I want to have only 2 possible wireless SIDs (for 2G or 5G) and not 4 (two for upstairs router and 2 for downstairs router).

[/LIST]
Any suggestions?

Andrea
  0      
  0      
#1
Options

Information

Helpful: 0

Views: 5420

Replies: 0

Related Articles