TL-MR6400, SNMP is not working at all
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-MR6400, SNMP is not working at all
Model : TL-MR6400
Hardware Version : MR6400 v1 00000000
Firmware Version : 1.0.12 Build 160322 Rel.33912n
ISP :
I enabled SNMP agent in the settings (via web interface), filled in rest of the fields with my SNMP manager's IP as 'Get Source' (I also tried network n.n.n.n/26).
But I get no answer at all for 'snmpwalk -c public -v 2c a.b.c.d' ('a.b.c.d' is the device's external (4G) IP address).
Web interface works through this external address ('a.b.c.d'). 'Remote Management IP address' is set to '255.255.255.255.'.
Risto
Hardware Version : MR6400 v1 00000000
Firmware Version : 1.0.12 Build 160322 Rel.33912n
ISP :
I enabled SNMP agent in the settings (via web interface), filled in rest of the fields with my SNMP manager's IP as 'Get Source' (I also tried network n.n.n.n/26).
But I get no answer at all for 'snmpwalk -c public -v 2c a.b.c.d' ('a.b.c.d' is the device's external (4G) IP address).
Web interface works through this external address ('a.b.c.d'). 'Remote Management IP address' is set to '255.255.255.255.'.
Risto