Archer MR200 - virtual Servers doesn't work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR200 - virtual Servers doesn't work

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR200 - virtual Servers doesn't work
Archer MR200 - virtual Servers doesn't work
2017-04-22 01:40:28
Model : Archer MR200

Hardware Version :

Firmware Version : 0.9.1 0.0 v004a

ISP :

Hello!

I want to use my brand new mr200 to connect from extern to my home network. So i set up no-ip.com and virtual servers for openvpn, ssh and for testing http ( with port forwarding from 81 to 80). All 3 servers are running on a orangepi and I can connect to the servers from internal LAN direct to the IP of the orangepi. But i cannot connect from external to the servers. I only can connect from external to the webinterface of the MR200. The destination IP in the virtual server configuration is the IP address of the orangepi. Ports are from 1194 to 1194, 22 to 22 and 81 to 80


So does anybody know why it doesn't work?

Greetings Reinhard
  0      
  0      
#1
Options
4 Reply
Re:Archer MR200 - virtual Servers doesn't work
2017-05-01 01:05:21
Do you have public IP address on the WAN port? Kind of you internet provider (ISP)?
  0  
  0  
#2
Options
Re:Archer MR200 - virtual Servers doesn't work
2017-05-02 21:23:43
Yes, i get an ip adress from my ISP (t-mobile austria) and i also can connect from outside to the admin page of the MR200, but if i want to connect to my orange pi, using the publicIP and port 81 or 22 or 1194 there is no forwarding to the orange pi, from internal network i can connect to the orange pi on port 80, 22 and 1194
  0  
  0  
#3
Options
Re:Archer MR200 - virtual Servers doesn't work
2017-05-03 18:23:39
Now it works, i had a wrong gateway and dns configuration on the orange pi

Just one more question - is there any cmd (telnet, http wtc. ) i can use on the orange pi to see / get the public IP-adress ?

greetings
reinhard
  0  
  0  
#4
Options
Re:Archer MR200 - virtual Servers doesn't work
2017-05-06 17:57:57
If you have router you can see public IP address in WAN (status tab of your router).
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1160

Replies: 4